DRK137B Anti- pressure High Temperature Boiler

Product details

 The tester is suitable for the steam test of food packaging, adhesive, Ink printing and other correlative films .It is also the optimal equipment for aseptic packaging test of food research Institute.

Product Features 

1.      Microprocessor control, automatic testing process;
2.      Over temperature protection, over pressure protection, water level protection, automatic leakage protection;
3.      Over temperature protection: micro-computer will stop machine automatically when temperature is beyond normal.
4.       Over pressure protection: Over the normal pressure range 3kg/cm (0.3MPa) the safety valves will release pressure automatically.
5.      Water level protection: the tester will stop heating and alarm when water level is lower than the normal leve.
6.      Safety interlocking device: pressurize after end closure closing, chain linkage function and alarm function.
3 Safety interlocking device: End cover positioning booster to combine with the interlocking device and alarm at the same time.
7 Anti-pressure functions: There are two safety valves. When steam pressure is over 0.25MPa, it release itself without broken bag phenomenon.
 8 When the inner temperature is up to 140℃, the power cuts off automatically.
9 Overload protections are provided with a heater and beep alarm performance when the cooking is over.

Product Application  
It is applicable in many packaging materials detection of high temperature cooking performance, such as packaging industry, food manufacturers, inspection institution, scientific research institution and medical units.

Technology Standard 
Adopt the electricity heating method, heat directly after pouring water into cooking chamber. Needed high pressure steam specimen to compress air from the outside after steaming, the temperature of the specimen will decline to 30～40℃, after quick-deep freezing hydraulic pressure for 3 minutes. It conforms to the standards of GB10004-1998GB21302-200.

Product Parameters

Effective volume: 50L
Test chamber size: Φ300mm×750mm(H)
Hydraulic pressure: 0~2.5kg/cm (0～0.25MPa)
Temperature of steaming: higher than room temperature 10℃～135℃
The maximum operating pressure: 2.5kg/cm (0.25MPa)
Design temperature: 3.5kg/cm2 （0.35 Maps）
Temperature control: microprocessor control
Time: 0～999minutes
Pressure gauge range: 0.1~0.3MPa (All stainless steel pressure vacuum gauge)
The heating source: Copper or stainless steel electric heater
Relative humidity: ≤80﹪
Power: AC220V, 50Hz (ground power pre-requisite)

Product Configuration

Mainframe、shelf、sampling clamp、plastic drainpipe wire、plastic pipe and etc.