DRK-XCY Low Temperature Brittleness Tester

Product details

Product Introduction

The XCY type low-temperature brittleness tester is the highest temperature at which the vulcanized rubber exhibits damage after being subjected to impact under the specified conditions. It is the brittle temperature. It can be used to compare the performance of non-hard plastics and other materials under low temperature conditions. The instrument is designed according to national standards, and the technical indicators meet the requirements of national standards such as GB/T 15256-2008 "Determination of low temperature brittleness of vulcanized rubber (multi-sample method)".

Technical Parameters

1. Test temperature 0oC to -40oC or -70oC or -80oC or -100oC (compressor refrigeration).

2. The distance between the lower end of the impactor and the lower end of the holder is 11±0.5mm, and the distance from the end of the impactor to the test piece is 25±1mm.

3. The weight of the impactor is 200±10g and the working stroke is 40±1mm.

4. The test freezing time is 3+0.5 minutes. The temperature fluctuation during the freezing time shall not exceed ±1 °C.

5. Lift the lifter to impact the sample within 0.5 seconds.

6, the dimensions: length 840mm, width 450mm, height 1450mm.

7, net weight: 104Kg

8, the whole machine consumes 200W.