DRK-CZF-5(UL94) Horizontal Vertical Burning Tester

Product details

Product Introduction

Test instrument for testing the combustion properties of plastics and non-metallic materials. A laboratory test method for the burning performance of plastic and non-metallic materials in a 50W flame condition, horizontal or vertical. (The real thing is shown on the right).

Product Features

1. Programmable controller touch screen + PLC control for control / detection / calculation / data display

2. High degree of automation: automatic recording of test time, automatic test results, automatic timing, automatic ignition, Bunsen burner automatically returns after the end of flame, you can choose whether to turn off the gas

3. Select whether to automatically ignite at startup

4. The front, back, up and down of the model clip can be touch screen control. Start, stop, gas, timing, ignition, save, save, illumination, exhaust are all realized by touch screen control, and the fingertip can be touched to complete the test.

5. Timing button cooperates with PLC to automatically record and store burning time

6. Test time system automatically records and generates test results.

Technical Parameters

Ambient temperature: room temperature ~ 40 ° C; relative humidity: ≤ 75%;

Supply voltage and power: 220V ± 10% 50HZ power 150W

The horizontal and vertical burning test programs can be switched on the touch screen, and the test results can be stored in the touch screen, and the test results can be queried;

Bunsen burner auto-ignition, automatic timing, ignition time can be set arbitrarily (can be preset on the touch screen)

Bunsen burner inner diameter 9.5mm ± 0.5mm

Can choose whether to automatically ignite before the Bunsen burner starts

After the flame is applied, the Bunsen burner is automatically returned, and the Bunsen burner is returned to select whether to turn off the gas.

Gas source: liquefied petroleum gas (additional methane gas during arbitration);

Steel plate electrostatic spray box

More than 0.5 cubic meters (supports non-standard 0.75m3, 1m3 size and stainless steel cabinet)

Instrument weight: about 100kg

Working power supply : 220V AC 50HZ

Timing range: 0~999.9s Timekeeping accuracy: 10s±0.2s 30s±0.2s;

Shiyan time: 0~999.9S (adjustable, can be preset on the touch screen)

Afterflame time : 0～999.9S

Residual time: 0~999.9S

Linear burning rate (V) PLC automatic calculation, touch screen display and save

Burning angle: 0°, 20°, 45°

Flame height : 20mm ~ 175mm adjustable

Flame temperature: (100-1000) °C adjustable

Gas flow rate: gas flow rate 105ml/min-1000ml/min adjustable

Burning lamp : The inner diameter of the lamp is 9.5±0.3mm, and the length is 100mm±10mm.

Time device : Accurate to 0.1S

Position adjustment: The sample holder can be adjusted up and down, left and right, the combustion seat can be adjusted back and forth, and the adjustment stroke is large.

Flame calibration device: (optional)

a. Temperature test range: 0~1000°C

b. Flame temperature requirement: the time from 100 °C ± 2 °C to 700 °C ± 3 °C within 23.5 seconds ± 1 second

c. Φ0.5mm (K type) nickel-chromium/nickel-aluminum wire thermocouple, insulated to ground

d. Heat transfer copper block: Ф4.0x6.0mm

Gas alarm system (optional)

Dimensions: width 1160mm × depth 600mm × height 1310 (including feet) mm

Combustion test area volume: >0.5 cubic, length * width * height about 900mm × 590mm × 1050mm, background black, background illumination ≤ 20Lux

The top is equipped with a silent and anti-backflow exhaust device, which can discharge the smoke generated by the combustion after the test.

Design Standard：

GB-T 2408-2008 Testing of Plastic Combustion Performance-Horizontal and Vertical Methods (ANSI/UL94-2006)

GBT10707-2008 Rubber Combustion Performance Measurement Method B (GB-T13488 Rubber Combustion Performance Measurement-Vertical Combustion Method)

Applicable Standard:

Test Method for Electronic and Electrical Components GJB360B-2009 111

GB/T5169.16-2008

ANSI/UL94

IEC 60950-1,

IEC695-2-2

Product Configuration

1. Equipment mainframe

2. Power cord

3. Dropping tray

4. Igniter

5. One screwdriver

6. Tightening Hoops

7. Gas Source Pipe One Point Wumi

8. Standby ruler

9. Instructions

10. Qualification Certificate