DRK133D Five-Point Heat Seal Tester

Product details

Product Introduction

DRK133D five-point heat sealing tester uses hot-press sealing method to determine the heat sealing temperature, heat sealing time, heat sealing pressure and other parameters of plastic film substrate, flexible packaging composite film, coated paper and other heat-sealed composite film. Heat sealing materials with different melting points, thermal stability, fluidity and thickness will exhibit different heat sealing properties, and the sealing process parameters may vary greatly. The DRK133 heat sealing tester, through its standardized design and standardized operation, Accurate heat seal test indicators are available to guide large-scale industrial production.

Product Features

Touch screen microcomputer control display, menu interface, digital PID temperature control, lower cylinder synchronous circuit, manual and pedal two test start mode, upper and lower heat seal head independent temperature control, can be customized a variety of hot cover forms, aluminum potting The uniform temperature heating tube, the quick-plug type heating tube power connector, the RS232 interface, and the anti-scald safety design can effectively ensure the convenience and safety of the user.

Product Application

It is suitable for heat sealing test of various plastic film, plastic composite film, paper-plastic composite film, co-extruded film, aluminized film, aluminum foil, aluminum foil composite film, etc. The hot cover is smooth and the heat seal width can be based on the user. The design of the requirements, as well as the experiment of various plastic hose seals.

Extended application: If the lid is frozen, put the jelly cup into the opening of the lower head, the opening of the lower head matches the outer diameter of the jelly cup, and the flange of the cup falls on the edge of the hole, and the upper head is made Rounded, pressed down to complete the heat sealing of the jelly cup (Note: need custom parts) plastic hose put the tube end of the plastic hose between the upper and lower heads, heat seal the tube tail, make the plastic hose become A packaging container.

Technical Standard

The hot-press sealing method is used to place the sample to be sealed between the upper and lower heat sealing heads, and the sealing of the sample is completed under a preset temperature, pressure, and time. The instrument meets various national and international standards: QB/T 2358, ASTM F2029, YBB .

Technical Parameters