F0013 - Foam Compression Tester
Product details
Complying with relevant standards, the Foam Compression Tester is used to evaluate a
degree of firmness common within the foam and furniture industries, either in the laboratory, o
r on the production line.
This universal measurement of firmness and hardness is based on a physical property called
the indentation force deflection (IFD) and is calculated by determining the force required
to deflect the test piece a percentage of its original thickness using a circular indentor.
The circular indentor foot applies a force, while also recording the degree of indentation.
To compare test results, test pieces must be of the same size and thickness. The whole
article may be used if moulded shapes are being tested.
Software Package:
The Foam Compression Tester offers a variety of software features that allows programming
of parameters, operational control and real-time display of the on-going test. This software
package allows the operator to conduct a wide range of tests with an almost limitless array
of test parameters and displayed test information when used with a compatible PC. The PC
based control system uses the Universal Tester program developed by IDM Instruments Pty Ltd®.
The Test Configuration is prepared for each test sample type. This procedure is fully automated.
The test scripts, as well as the operating parameters, are entered in the Configuration Panel to
run a test. Values including the test type, sample piece, sample size, standard reference and
many more values can all be entered and also saved to be retrieved at a later stage.
The Software Program for the Foam Compression Tester is automatic. Once the Test
Configuration menu has been programmed, “Start" button is pressed, initiating the test.
The results of the test are displayed on the PC in real time. They can then be saved
and/or printed for later use.
Foam Compression Tester sample test screen
Software Feature:
• Data Sampling is adjustable from 1-200,000Hz