-
Phone
+86-769-23836636,+86-769-22768286
-
Address
Wentang Road,Chashang industrial zone #18,Dongcheng,Dongguan,Guangdong,China
Membership
Help
Dongguan Tuancheng automation equipment Co., LtdFree·1YRS
+86-769-23836636,+86-769-22768286
Wentang Road,Chashang industrial zone #18,Dongcheng,Dongguan,Guangdong,China
ATS106 is an Automatic Transfer Switch Control Module.The module features 32 -Bit microprocessor control.Once mains AC supply failure are detected (under voltage, over voltage), The module will control generator to start . If generator AC can load, The module automatically transfer the switch to generator AC supply.
Micro-processor based design;
Meter two single -phase AC Voltages ;
Set AUTO or MANUAL via PUSH BOTTON mounted on the front panel;
Two isolable N designed ;
7 LEDs display the status ;
Operational timers can be altered by PC;
Control generator to Start.
DC supply: 8 to 35V(1.5VA)
Single -phase AC input : AC30~277V (+20%) 50/60Hz
Relay output:
Relay of close mains & close gens: 16A 250VAC
Relay of start generator: 5A 250VAC
Delay timers :
Mains Normal delay time: 0~3 600s
Mains Abnormal delay time: 0~3600s
Gens Normal delay time: 0~3600s
Start generator time:0~3600s(after Mains is abnormal)
Stop generator time: 0~3600s(after Mains is normal)
Close time:0~20.0s
Over close time: 0~5.0s
Between close time: 0~3600s
Critical value:
Mains under voltage: 0~360V
Mains over voltage:0~360V
Gens under voltage:0~360V
Gens over voltage:0~360V
Gens under frequency : 0~60.0Hz
Gens over frequency : 51.0~75.0Hz
Accessorial input:state can be altered by PC
Operating Temperature Range: -30 to +70℃