Welcome Customer !

Membership

Dongguan Tuancheng automation equipment Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 发电机

Xwboo>Products

Dongguan Tuancheng automation equipment Co., LtdFree·1YRS

  • E-mail

  • Phone

    +86-769-23836636,+86-769-22768286

  • Address

    Wentang Road,Chashang industrial zone #18,Dongcheng,Dongguan,Guangdong,China

Contact Now

ESC5550 Genset governor

Model
Nature of the Manufacturer
Other
Product Category
Speed Governor
Place of Origin
City, Province
Overview
ESC5550 Genset governor
Product Details
Introduce
Product:
User manual:
Software Download:

Description:

The ESC5550 Speed Governor is an upgraded version of the ESC5500E that adds overspeed protection and is more reliable and safer than the conventional speed control board + overspeed protection board.Can solve the black smoke phenomenon caused by rapid refueling , greatly improving the engine life. It is usually installed in the control cabinet or directly attached to the engine.The speed controller is moisture-proof, but water, mist or condensation must be prevented from coming into contact with the governor.

Isochronous Operation/Steady Stability-----+/-0.25% or better

Supply-----12 or 24 VDC Battery Systems(transient&reverse voltage protected)

Power Consumption-----50 ma continuous plus acutator current

Maximum Actuator Current at 25ºC(77ºF)-----10 Amps continuous

Technical Data:

 

 Input Supply 12 or 24 VDC Battery System (Transient and Reverse Voltage)
 Polarity Negative Ground (Case Isolated)
 Power Consumption 50 ma continuous plus actuator current
 Actuator Current Range @77°F
 (25 °C) - (Inductive Load)
 Min.2.5 Amps; Max. 10Amps continuous
 Speed Sensor Signal 0.5-120 Volts RMS
 Speed switch Relay
 Contacts(N.O.and N.C)
 10 Amps
 Performance Isochronous Operation/Steady
 State Stability
 ±0.25% or better
 Speed Range/Governor 1K to 7.5K Hz continuous
 Speed Drift with Temperature ±1% Max
 Idle Adjust CW 60% of set speed
 Idle Adjust CCW Less than 1200 Hz.
 Droop Range 1-5% regulation
 Droop Adj. Max. (K-L
 Jumpered)
 400 Hz., ±75Hz. Per 1.0A change
 Droop Adj. Min. (K-L Jumpered) 15Hz., ±6Hz. Per 1.0A change
 Speed Trim Range ±200 Hz
 Remote Variable Speed Range 500 - 7.5 Hz. Or any part there of Terminal Sensitivity
 Terminal Sensitivity J 100 Hz., ± 15Hz / Volt @ 5.0 K Impedance
 Terminal Sensitivity L 735 Hz., ±60 Hz / Volt @ 65 K Impedance
 Terminal Sensitivity N 148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance
 Terminal Sensitivity P 10 VDC Supply @ 20 ma Max
 Speed witch adjustment range 1000-10000HZ
 Environmental Ambient Operating
 Temperature Range
 -40 to +180°F(-40°+85 °C)
 Relative Humidity Up to 95%
 All Surface Finishes Fungus Proof and Corrosion Resitant
 Reliability Vibration 1G @ 20 to 100 Hz.
 Testing 99% Functionally Tested
 Physical  Dimensions See outline (FIGURE 1)
 Weigh1 1.8 lbs.(820 grams)
 Mounting Any position, Vertical Preferred


Similar Product Recommend