Welcome Customer !

Membership

Dongguan Tuancheng automation equipment Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 发电机

Xwboo>Products

Dongguan Tuancheng automation equipment Co., LtdFree·1YRS

  • E-mail

  • Phone

    +86-769-23836636,+86-769-22768286

  • Address

    Wentang Road,Chashang industrial zone #18,Dongcheng,Dongguan,Guangdong,China

Contact Now

ESC5330 Genset governor

Model
Nature of the Manufacturer
Other
Product Category
Speed Governor
Place of Origin
City, Province
Overview
ESC5330 Genset governor
Product Details
Introduce
Product:
User manual:
Software Download:

Description:

The basic features of the ESC5330 speed controller are the engine "start fuel" and "fuel ramp" adjustments; there are two speed switches (overspeed protection and start motor stop); the acceleration and deceleration rates can be independently controlled during shifting; The working speed is adjustable. The ESC5330 is suitable for all GAC actuators including the ACB2000 electronic actuator. Its "DROOP" speed range is less than the low current requirements of the ADC100 series of electronic actuators, so ESC5331 should be used for ADC100.

WIRING:

The electrical connections are illustrated in figure 1. on page 3. Actuator and Battery connections to terminals ABC and D should be appropriately sized with respect to to maximum current consumption of the actuator that is being used. Long cable runs require an increased wire size to minimize voltage drops.

Battery positive (+) input, Terminal D, should be fused for 20 Amps as illustrated to protect system wiring.

The magnetic speed sensor connections to Terminals E and F must be shielded for their entire length. The speed sensor cable shield should only be connected to the case as shown.

The shield should be insulated to insure that no other part of it comes in contact with engine ground, otherwise, stray signals may be introduced into the PER5330 causing erratic operation.

Relative products:

3044196

3044195

4914090

3062322

3062323

3098693

3037359

 

Input Supply 24 ± 20% VDC battery systems ( transient and reverse voltage 
 Protected)
 Polarity Negative Ground (Case Isolated)
 Power Consumption 100 MA (No actuator current)
 Maximum Actuator
 Current
 Internally limited to 9 A continuous
 Speed Sensor Signal 0.5-50 Volts RMS
Performance Isochronous 
 Operation/Steady State 
 Stability
 ±0.25% or better
 Speed Range/Governor 1K to 7.5K Hz continuous
 Speed Drift with 
 Temperature
 ±1 Max
 Idle Adjust CW 25-85% of rated speed 
 Droop Range Adjustable from 0-5% for a 1.5 A actuator current change 
 Droop Adj. Max. (K-L 
 Jumpered)
 400 Hz., ±75Hz. Per 1.0A change
 Speed Trim Range ±200 Hz
 Remote Variable Speed 
 Range
 25 to 99% of rated speed
 Terminal Sensitivity H -105 Hz, ±15 Hz/Volt @ 5 K Impedance
 Terminal Sensitivity M -130 Hz, ±15 Hz/Volt @ 1 M Impedance
 Terminal Sensitivity K -685 Hz, ±40 Hz/Volt @ 225 K Impedance
 Terminal Sensitivity N +1000 Hz, ±50 Hz/Volt @ 8 K Impedance
Environmental Ambient Operating 
 Temperature Range
 -40 to +85 Deg. C
 Relative Humidity Up to 95%
 All Surface Finishes Fungus Proof and Corrosion Resitant
Reliability Vibration 1G at 20 to 100 Hz.
 Shock 10 G (11 ms)
 Testing 99% Functionally Tested

 


Similar Product Recommend