Welcome Customer !

Membership

Dongguan Tuancheng automation equipment Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 发电机

Xwboo>Products

Dongguan Tuancheng automation equipment Co., LtdFree·1YRS

  • E-mail

  • Phone

    +86-769-23836636,+86-769-22768286

  • Address

    Wentang Road,Chashang industrial zone #18,Dongcheng,Dongguan,Guangdong,China

Contact Now

LV230 (R230) Generator AVR

Model
Nature of the Manufacturer
Other
Product Category
Generator AVR
Place of Origin
City, Province
Overview
LV230 (R230) Generator AVR
Product Details
Introduce
Product:
User manual:
Software Download:

Product description:

Generator AVR R230 is a half-wave phase controlled thyristor type,for a brushless generator. In addition to regulating the generator voltage, the AVR circuitry includes under speed, and sensing loss protection to ensure safe, reliable control of the generator. Positive voltage build up from residual levels is ensured by the use of proficient semiconductors in the power circuitry of the AVR.the exciter field windings to offer closed loop control of the output voltage with load regulations of +/- 1.5%.

* The regulator monitors the exciter excitation current as a function of the alternator output voltage.

* Very simple in design,the alternator with shunt excitation has no sustaining short-circuit capacity.

* Voltage Regulation:around +/-0.5%

* Voltage supply/sensing range 85 ~139 V (50-60Hz)

* Rapid response time (500 ms) for a transient voltage variation amplitude of ± 20%

* Voltage setting P1
* Stability setting P2.

* Initial potentiometer settings :

1) P1 potentiometer (AVR voltage adjustment): fully anti-clockwise.

2)  Remote voltage adjustment potentiometer: centre position.
Run the alternator at its rated speed. If the voltage does not
increase, the magnetic circuit should be remagnetized (see
section 2.3).

3) Turn the AVR voltage adjustment potentiometer P1 slowly
until the output voltage rated value is obtained.

4) Adjust the stability setting using P2.

5)  Sealed potentiometer P3 is factory set at 48 Hz for 50 Hz


 Sensing Input Voltage 85 to 139 V
 Frequency 50/60 Hz
 Output Voltage Max 75 V dc at 100V ac input 
 Current Continuous 4A dc; Intermittent 8A
 Resistance 15 ohms minimum 
 Regulation  +/-0.5%