HG G-98830

2-dim. Positioning and Identification Antenna with CAN / CANopen®

Overview

· Transponder antenna for Automated Guided Vehicles (AGV)

· Flat casing, sealed electronics

· Indoor & outdoor, IP 64

· Mounting directly on or flush with metal

· Reading distance 20 to 80 mm, nominal reading distance 50 mm

· Active area for positioning 200 mm x 200 mm

· Max. crossing speed 4 m/s

· Voltage supply 18 - 36 V, current consumption max. 1 A when programming transponders, typically 300 mA @ 24 V

· Connectors: 3 x M12 5 pin, A coded: 1x Power (incl. serial RS 232 + PosiPulse) / 2x CAN

· CAN module according to CAN specification V2.0 part B, standard / extended frames or CANopen®

· PosiPulse when crossing the middle axis in direction of travel, 24 V 20 mA power source, not isolated

· Serial interface either usable as service interface for the configuration (default, also for firmware updates) or data interface (telegram contents can be configured)

· Programming of Transponders

The antenna is used for the localization and track guidance of automated guided vehicles (AGV) or cranes. All settings, calibrations and software updates necessary for the operation of the antenna can be conducted via a serial interface or CAN/CANopen®.