W401 Water Vapor Permeability Analyzer
This machine covers a procedure for determining the rate of water vapor transmission through flexible barrier materials using a Modulated Infrared Sensor . The method is applicable to sheets and films up to 3 mm (0.1 in.) in thickness, consisting of single or multilayer synthetic or natural polymers and foils, including coated materials. It provides for the determination of (1) water vapor transmission rate (WVTR), (2) the permeance of the film to water vapor, and (3) for homogeneous materials, water vapor permeability coefficient.
A dry chamber is separated from a wet chamber of known temperature and humidity by the barrier material to be tested. The dry chamber and the wet chamber make up a diffusion cell in which the test film is sealed. Water vapor diffusing through the film mixes with the gas in the dry chamber and is carried to a pressure-modulated infrared sensor. This sensor measures the fraction of infrared energy absorbed
by the water vapor and produces an electrical signal, the amplitude of which is proportional to water vapor concentration. The amplitude of the electrical signal produced by the test film is then compared to the signal produced by measurement
of a calibration film of known water vapor transmission rate. This information is then used to calculate the rate at which moisture is transmitted through the material being tested.
ASTM F1249-2013, BS EN ISO 15106-2-200,JIS K7129-2008, GB/T 26253-2010,YBB -2015
Item | Technical parameters |
Test range | 0.001~500 g/m2·24h(film and sheet) |
Test precision | 0.001 g/m2·24h(film and sheet) |
Temperature range | 15~45℃(15~60℃ optional) |
Temperature accuracy | ±0.1℃ |
Humidity range | 30~90%RH,99%RH |
Humidity accuracy | ±1%RH |
Test area | 50.24 cm2(with additional adapting piece and be small as 0.785 cm2 ) |
Sample size | Φ100 mm |
Sample thickness | ≤3mm |
Number of test sample | 1 piece |
Carrier gas | 99.999% N2(user provide) |
Carrier gas pressure | ≥0.1MPa |
Carrier gas flow | 5~120 mL/min |
Gas supply port | 1/8 inch metal pipe |
Instrument size | 600×400×330mm |
Weight | 80kg |
Power | 750W |
Power supply | AC 220V,50Hz |
l Accurate data
l Equipped with high-precision temperature and humidity sensor for real-time monitoring and recording temperature and humidity changes.
l Designed according to ASTM F1249 Using a Modulated Infrared Sensor
l Cutting-edge ARM controlling system
Intelligent Control
1. Automatic operation: input the test temperature and humidity, click one key to start the automatic test.
2. Provide water vapor transmission curve, water vapor transmission coefficient curve, temperature curve, humidity curve.
3. Ultra wide test range, meet the barrier test of various materials. (Customized)
Ø High efficiency
1. With three different test modes to test films with different barrier property.
2. In the same test cycle, the testing number of samples completed increased from 2 to 3.