4K 120M HDMI Extender with local loop out and audio output

Features

 Support HDMI 1.4/HDCP1.4;

* Support local loop-out ;

 *Support 120m long distance transmission：CAT 5E/6 Cable(120M)HDMI Cable Loop-out

* Low power consumption, low temperature and high safety；

* Both the TX and RX support 3.5MM left and right audio output；

* Support IR control；

* Support one power to charging TX and RX;

Specifications:

Length of CAT5e/CAT6 cable between Rx and TX …………….......................... 120 meters

HDMI Input …..…………………...………..................... 4k/1080p/720p/576p/576i/480p/480i

HDMI Output …..…………….….................................. 4k/1080p/720p/576p/576i/480p/480i

Max bandwidth ………………………………………………………………………….. 340MHz

Max baud rate ……………….…….………………….………….…………………... 3x3.4Gbps

Input video signal ………….…………………………………………….…...... 0.5~1.5Volts p-p

Output DDC signal …………………………………………………................. 5Volts p-p (TTL) 

Input HDMI cable distance ………….…………............ ≤10m AWG26 HDMI standard cable

Output HDMI cable distance ....................................... ≤10m AWG26 HDMI standard cable

TX Max working current ………………………………………...………….……………. 350mA

RX Max working current …………………………………………...…………………….. 200mA

Power adapter format ………..…... Input:AC (50HZ, 60HZ) 100V-240V; Output: DC12V/2A

Operating Temperature range ……..…………….……………………….......…… (0 to +45℃)

Operating Humidity range ………………………….…..…… 5 to 90%RH (No Condensation)

Dimension (L x W x H) ……………………………….…………………… 107x105x27.3 (mm)

TX Weight …..……………………………………………..………………………........…… 250g

RX Weight .................................................................................................................... 248g

Connecting and Operating:

1.Connect one HDMI cable between source device and TX Extender, the max cable  distance is 10 meters

2.Connect one HDMI cable between display device and RX Extender, the max cable  distance is 10 meters 

3.Connect single cat-5e or cat-6(recommended) cables instead of HDMI cables between  TX and RX Extender, the max cable distance is 120 meters

4.Connect 12V power supply to the TX and RX.

5.LED indicator light TX LED indicator light: Turn it on, green light; when there is a signal input,  the yellow light flashing. RX LED indicator light: Turn it on, green light; when there is a signal input,  the yellow light flashing.

6.The pairs of IR RX and IR TX cable connect the 3.5mm IR RX and IR TX port of the receiver and transmitter respectively.（Just connect when you need it）