Energy Measurement: active energy (kwh), reactive power (kvarh) Standard CT, PT or voltage direct input ,which can be used for a variety of wiring modes Measuring one phase current, voltage, active power, reactive power,etc
●Measuring one phase current, voltage, active power, reactive power,etc
●Standard CT, PT or voltage direct input, which can be used for a variety of wiring modes
●Energy Measurement: active energy (kwh), reactive power (kvarh)
● Wide range of ac/dc general power supplying: AC/DC110V ~ 250V
● All instrument parameters can be set through the display panel.

Note: Accuracy is equivalent to" precision "as the standard of JJF1001" in the universal measurement terms and definitions
●Energy Management System
●Industrial Automation
●Residential Electricity Monitoring
●Substation Automation
●Distribution Network Automation
●Intelligent Building

Precautions
●Recommended connection cable diameter is 1.5 square, Maximum is 2.5 square
●Communication cable can be the shielded cable. And the cables of input, communication and power should be routed separately. Pay attention to environmental conditions. whether there is some corrosive gases or not, if any, you should notify the manufacturer when ordering
●When adjusting the live programming current transformation ratio, it should correspond to the specifications of primary current transformer
● Be sure of cutting off the power supply product installing, when disassembling maintenance checking and wiring, otherwise it will cause to shock or burnt the equipment
●Switch input power is DC voltage, you must follow the correct polarity connection