-
Phone
+81-77-527-9860
-
Address
4-7-5, Nionohama Otsu, Shiga 520-0801, Japan
Membership
Help
OPTEX FA CO., LTD.Free·1YRS
+81-77-527-9860
4-7-5, Nionohama Otsu, Shiga 520-0801, Japan
Communication unit UC1-CL11 enables the D3RF seriesfi ber sensors or the CD22 series laser displacementsensors* to be connected to CC-Link networks.
Because sensors can be managed over a network, itis now possible to easily monitor receiving lightquantity and measurement values, remotely operatesensors, and back up set values.
*A CDA series displacement sensor amplifi er unit is necessary for the CD22 series.

Sensors can be operated over CC-Link networks using Mitsubishi Electric’s GX Works2.
By connecting and linking devices, batch management is enabled and increased workability is possible.

Only 2 cables, including a power supply cable and CC-Link cable, are needed, enabling time spent on wiring to beshortened. Space saving is made possible as the need for multiple sensor cables is eliminated.

Determining which sensor is the cause of device malfunctions takes time, and determining the underlying cause consumesman-hours. By connecting all sensors used in the production line to CC-Link network, you will be able to improve traceabilityand maintainability drastically.
By reading out and saving sensor settings in advance,past settings and current settings can be compared toeasily identify the causes of malfunctions. By inputting thecorrect settings for the sensor that caused themalfunctions, it is possible to restore the system instantly.

It is possible to backup setting parameters of sensors inthe SD memory card and restore the data into sensorsfrom the SD memory card on the PLC. A computer is notnecessary when replacing sensors, enabling deviceoperation to be restarted quickly.

When a device operating abnormality is found, it ispossible to remotely confirm the receiving light quantityand settings of the sensors over the network. This enablesconditions to be confirmed quickly without entering theworksite.
