-
Phone
+81-77-527-9860
-
Address
4-7-5, Nionohama Otsu, Shiga 520-0801, Japan
Membership
Help
OPTEX FA CO., LTD.Free·1YRS
+81-77-527-9860
4-7-5, Nionohama Otsu, Shiga 520-0801, Japan
Features mounting holes for M3 screws. This enables the amplifier to be mounted without use of a DIN rail or mounting bracket.

Featuring an IP66 structure uncommon for fiber-amplifiers. Can be used without worry in factories or with devices in which contact with water occurs.

Both a cost-effective cable type, as well as a connector type that does not require wiring when replacing sensors, are available.


Features an 8-turn potentiometer. Adjustment to the optimal sensitivity is possible even for applications that require fine adjustments.
Also, if the potentiometer is turned multiple times, the current sensitivity will be difficult to ascertain. However, because the V2RF is equipped with a sensitivity indicator, it’s easy to see how much sensitivity is being adjusted.
Equipped with an OFF delay timer fixed at 40 ms. By extending the pulse width to 40 ms or more, input is possible even for input devices that cannot receive short ON/OFF signals.
With the V2RF series, long range detection is achieved even though it has the same 250 μs response time as the conventional model.
| Model of fiber-unit | Sensing distance of conventional model | Sensing distance of V2RF | Comparison to conventional model | |
|---|---|---|---|---|
| Diffuse-reflective type | NF-DS06 (M3, Standard) | 45 mm | 60 mm | 30% UP |
| NF-DB07 (M3, Coaxial) | 55 mm | 90 mm | 60% UP | |
| NF-DH07 (M4, UP to 200℃) | 200 mm | 300 mm | 50% UP | |
| Through-beam type | NF-TB02 (M3, Standard) | 450 mm | 610 mm | 35% UP |
| NF-TK05 (φ3, Flexible) | 360 mm | 540 mm | 50% UP | |
| NF-TH12 (M4, UP to 200℃) | 220 mm | 410 mm | 85% UP |