-
Phone
+81-77-527-9860
-
Address
4-7-5, Nionohama Otsu, Shiga 520-0801, Japan
Membership
Help
OPTEX FA CO., LTD.Free·1YRS
+81-77-527-9860
4-7-5, Nionohama Otsu, Shiga 520-0801, Japan

Equipped with a distance adjustment, unusual for an oil-resistant/IP69K compliant BGS sensor. Because distance adjustments are performed using a potentiometer and not the sensor mounting position, time can be saved and designs can be made more flexible.

Equipped with a newly developed 4 element red LED Light source. In addition to minimizing the decreases in emitted light that occur over time, it is also tolerant againstdust and fine particles.

Achieved an IP69K degree of protection that is tough against humidity, water, steam cleaning, etc. Sensor features a tough design that doesn’t break even when exposed to high-pressure washing on food processing machinery or when used in severe environments. Of course, it has also clear IP67.

IP69K is a protection rating stipulated by German standard DIN40050 Part 9.
Sensors are placed on a turntable and rotated 5 times per minute while being sprayed with water under the following conditions.
| Water pressure: | 80 to 100 bar |
| Flow rate: | 14 to 16 l/m |
| Water temperature: | +80℃ / -5℃ |
| Distance from spray nozzle: | 100 to 150 mm |
| Spray angle: | 0°, 30°, 60°, 90° |
| Spray time: | 30 seconds at each angle |
*IP69K does not guarantee operation under the above conditions. Water or oil that adhere to the optical surface could cause light to refract and prevent detection from being performed correctly.
*Excluding connector type and reflector.