Welcome Customer !

Membership

King Pigeon Communication Co.,Ltd.
Free Member ·1YRS
,
Other

Main Products: 网关

Xwboo>Products

King Pigeon Communication Co.,Ltd.Free·1YRS

  • E-mail

    KP02@IoT-Solution.com

  • Phone

    0086-135-6033-9018

  • Address

    303-305,B Building, Huafeng International Robot Industry Park Baoan District,Shenzhen,518126,Ch

Contact Now

Embedded Machine Vision Controller BL360

Model
Nature of the Manufacturer
Other
Product Category
IPC&Vision Controller
Place of Origin
City, Province
Overview
BL360 series fanless embedded machine vision controller is designed for machine vision applications, it can be connected to GigE industrial cameras. Baytrail Intel® Celeron J1900 processor, onborad memory DDR3L 1333MHz, 4GB capacity.
Product Details
IntroductionFeaturesSpecificationsDownloadApplications
L360 series fanless embedded machine vision controller is designed for machine vision applications, it can be connected to GigE industrial cameras.
Baytrail Intel® Celeron J1900 processor, onborad memory DDR3L 1333MHz, 4GB capacity. 4 channel light control and 4 channel camera trigger IO specially for machine vision control, etc.


BLIIoT BL360 Fanless Embedded Machine Vision Controller adopts Celeron J1900 CPU, with camera light drive, camera I/O trigger function, integrates industrial computer and vision control. 
It is a low-cost and high reliability solution suitable for visual inspection application scenarios in logistics warehousing, barcode labeling, food processing, defect identification, PCB production, chip defect, printing and packaging and others.  
Baytrail Intel® Celeron J1900 processor, onborad memory DDR3L 1333MHz, 4GB capacity. 4 channel light control and 4 channel camera trigger IO specially for machine vision control, etc. it can be connected to GigE industrial cameras.
BL360 Fanless Embedded Machine Vision Controller
CoreCPUIntel®Celeron J1900,2MB Cache, 4Cores, 4 Threads,2.00GHz ,TDP 10W,22nm
MemoryOnboard 4GB DDR3L 1333MHz
Operating systemsWindows 7/Linux
BIOSAMI BIOS, Support custom boot LOGO
Power Supply
I/O Interface
Power Input I1xDC IN 24V, 24V/4A (For entire device)
Power Input II1xDC IN 24V-48V, backup power supply (For light source)
USB I3xUSB2.0
USB II1xUSB3.0
LAN1xRJ45, Intel® I211AT 
POE2xPOE, Standard Gigabit IEEE 802.3af(12.95W)PoE Port
COM I2x3 wire RS-232, Share 1 standard DB-9 connector
COM II1xRS-485
Boot mode1xDIP switch, ATX(Power on) or AT(Trigger)
Clear CMOS1xDIP switch, Clear CMOS is "CMOS", Regular is "OFF"
HDMI1xHDMI interface, maximum supported resolution is 1920*1200
Power switch1xCircular button switch with light
One-click Recovery1xRight angle double layer tact switch
Requirement: The hard disk capacity not less than 64G
One-click Backup
Indicator Light1xBRI, Backup restore indicator. Press the backup or restore button.
Green light always on: Working
Light off: Work Completed
1xHDD Indicator
GPINPN, PNP mode input DC 6V-30V
GPOMaximum output current of each channel is 500mA, Output voltage is DC 9-30V(Depending on supply voltage)
Light Control4x(Can be independently controlled), 12V-24V, 15mA trigger current
1, Output voltage is+DC 24V, Maximum current of a light is 1A, power consumption is 24W. If 4 light used at the same time, the maximum total power consumption needs to be calculated according to the actual situation.
2, Baud rate of each common serial port can be set
3, High-level input trigger control the light, also can be triggered by serial port commands
Camera Trigger IO4xCamera Trigger
Synchronize with the state of the light output
For example: Light on, then IO controls the camera to take pictures
IO voltage is 24V, 12V, 5V(Default 12V, Current of each is about 15mA)
Camera Power Supply2xDC OUT 12V, Each channel supports a maximum current of 2A. Each channel can supply power for four 5W cameras.
Built-in
I/O Interface
Storage I1xMSATA hard disk interface(32GB/64GB/128GB/256GB), default 64GB
Storage II1x7+15PIN SATA2.0 interface
WIFI/4G1xRight Angle MINIPCIE Connector, Support WIFI or 4G
SIM1xSIM card slot
USB2.01xUSB2.0, can be connected to dongle
WatchdogWDTSupport 256 level(0~255), Programmable
Electrical CharacteristicsWorking Humidity5%~90%
Working Temperature-20℃~60℃
Storage Temperature-40℃~85℃
StructureDimension(mm)222.6x125.4x65mm
Weight1.4kg
InstallationDIN Rail 
 
Similar Product Recommend