Welcome Customer !

Membership

Zhejiang Leitai Electrical Co. Ltd.
Free Member ·1YRS
,
Other

Main Products: 避雷器

Xwboo>Products

TNR-X Surge protective deviceTNR-X series T1 10/350 Surge Protective Devices

Model
Nature of the Manufacturer
Other
Product Category
TNR-X series T1 10/350 Surge Protective Devices
Place of Origin
City, Province
Overview
TNR-X Surge protective device
Product Details
Application scope

TNR-X series surge protective device issuitable for protecting all kinds of electronic and electrical equipments inbuildings of T1 class lightning protection area, where it’s easy caused lightningovervoltages. Mainly used for main distribution system and installed on thefront end of power distribution cabinet  as First tier protection


IEC61643-11 Standards

A surge protective device of T1 should be installed at the general distributionbox connected with the power supply. The voltage level of surge protective deviceshould be less than or equal to 2.5KV. When the impulse current value is notdetermined, the impulse current should be equal to or larger than 12.5KA


Technical parameter
ModelTNR-X(100)TNR-X(50)TNR-X(25)TNR-X(15)
Maximum sustained operating voltage Uc(V~)255,385,440255,385,440320,385,440320,385,440
Nominal discharge current ln(ka)50505030
Maximum impact current limp(ka)100502515
Protection level Up(kv)<2.5~4.5<2.5~4.0<2.5~3.5<2.5
Protection modeL/N-PE L-NL-N-PE L-NL-N-PE L-NL-N-PE L-N
response time (ns)<100<100<25<25
Working temperature range(℃)-40~+70
Intercepting area of access wire(mm²)16-35(Multi strand copper cored line)
Power supply systemTN TT IT
Product connection and size
Installation matters

This product is installed in parallel in front of the protected equipment, and is installed with fusing circuit protection. This product is installed around the guide rail as a combustible material, and should keep the 10cm distance from each part.

Similar Product Recommend