Welcome Customer !

Membership

Shenzhen ShanLong intelligent control co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 工业机器人

Xwboo>Products

Shenzhen ShanLong intelligent control co., Ltd.Free·1YRS

  • E-mail

    shanlong@shanlong.cn

  • Phone

    0755-26688518

  • Address

    6 floors north of 2B Building, Chuangwei Innovation Valley, Baoan District, Shenzhen

Contact Now

CA400-X1 four-axis motion controller Panel furniture control system Feeder control system

Model
Nature of the Manufacturer
Other
Product Category
Motion control series
Place of Origin
City, Province
Overview
The CA400 is a four-axis four-link controller that can operate independently without a computer mainframe. It has a standard servo wiring port and reserves multiple reserved IO ports, which is very suitable for customer expansion. The optimal path processing is adopted, and the processing efficiency is higher. CA400, true four-axis linkage, truly no dead angle processing.
Product Details

The CA400 is a four-axis four-link controller that can operate independently without a computer mainframe. It has a standard servo wiring port and reserves multiple reserved IO ports, which is very suitable for customer expansion. The optimal path processing is adopted, and the processing efficiency is higher. CA400, true four-axis linkage, truly no dead angle processing.

◆ Servo standard wiring

It has standard servo wiring port, specific encoder zero feedback signal, servo alarm and other interfaces.

◆ Optimal path calculation

Optimal path processing in the rotating shaft path ensures maximum machining efficiency.

◆ Brake function

It has the functions of brake input and brake output, and the servo communicates with the system to ensure the coordination time of the motor brake, so that there will be no knives at the moment of starting and shutting down.

◆ Three-axis four-axis universal

Supports three-axis round carving, three-axis flat carving, and four-axis circular carving switching. Only parameter configuration is required, and it can be used without adjusting the wiring.

◆ Support hand wheel processing

In the handwheel mode, the machine can be moved in the state of strict pulse counting and reverse machining.

◆ Offset function

It has the function of automatically dividing the workpiece origin and manually adjusting the workpiece origin coordinate, which greatly facilitates the customer to set the workpiece origin.


Performance parameters
projectspecifications
control axis Four axe
FieldbusMECHATROLINKIII
Hard disk capacity4G
Display InterfaceVGA signal output
Input MethodMouse Keyboard
USB 4 USB 2.0
I/OStandard: Input 16/output 16; Support for multilevel extended version cascades
Spindle signal0-10V analog signal
Processing processMirror rotation, circular processing, three-axis turntable configuration, four-axis turntable configuration
Encoder feedbackAbsolute encoder, drive A/B/Z feedback signal
Tool modeAutomatic, manual
Type of Tool Fixed tool、Floating tool
Arc interpolationThree-axis linkage
Handwheel guidanceHandwheel processing, handwheel reverse line

Methods of compensation
With Reverse Backlash Compensation, Screw Rod Deviation Compensation, Tool Compensation;
File SupportNC、ISO、ENG、TAP、PLT、DXF
Network featuresSupport Network Management: Implementation of Two-way Transmission and Processing Management with PC
Interpolation algorithmTrapezoidal algorithm, S-type algorithm, acceleration trapezoidal algorithm, mixed algorithm
Sweep codeSupport USB Universal Serial Interface Scanning
languageChinese, English, Vietnamese


Three-dimensional round carving, stone carving, jade carving, plate furniture

Similar Product Recommend