1. The internal single battery adopts the anode material of lithium ferrous phosphate(LiFePO4), which has high safety, high energy density and excellent cycling performance;2. The battery pack is equipped with BMS, a high-performance battery management system, which has the protection functions of over discharge, over charge, over current, high temperature and low temperature to ensure the safety of the battery pack;3. Automatic charge and discharge management. The monitoring unit automatically measures the charge and discharge current of the battery and manages the floating charge and even charge of the battery;4. When the battery voltage is lower than the alarm value, it will alarm, and when the voltage is too low, it will automatically power down to protect the battery;5. The battery pack has good electromagnetic compatibility.
No.
| Item
| Testing instruction
| Requirement
|
| 1 | Vibration Test
| Battery will be vibrated 30 minutes in three mutually perpendicular directions and changing frequency between 10 to 55Hz. The rate of scanning frequency is from 10 Hz to 55Hz with the rate of 1Hz per min. Vibration frequency:10-30Hz amplitude:0.38mm vibration frequency:30-55Hz amplitude:0.19mm
| The battery shall not rupture, smoke, explode or leak. Battery electric voltage ≥48V
|
| 2 | Constant Temperature/ Humidity Test
| Keep the battery at 40±2℃ and 90%-95%RH for 48 hrs after complete charge. After the test, keep the battery at 20±5℃ for 2 hrs. Discharge at 10A constant current discharge to the termination voltage.
| Appearance of the battery shall not rust, smoke or explode. Discharge Capacity ≥ 80%
|
| 3 | High Temperature Performance Test
| Keep the battery at a hot oven with 55±2℃ for 2 hrs, then measure the capacity with constant discharge current 0.5C to discharge protection point after complete charge. After the test, keep the battery at 20±5℃ for 2 hrs.
| Appearance of the battery shall not rust, smoke or explode Discharge Capacity > 90%
|
| 4 | Low Temperature Performance Test
| Keep the battery at -20±2℃ for 16-24 hrs, then measure the capacity with constant discharge current 0.5C to discharge protection point after complete charge. After the test, keep the battery at 20±5℃ for 2 hrs.
| Appearance of the battery shall not rust, smoke or explode. Discharge Capacity > 55%
|
| No. | Item | Testing instruction | Requirement |
| 1 | Over-charge test | Charge in accordance with the following two ways (Choosing one between the two). (1)Charge at 1C current for 90min or until voltage of some single battery reaches 5.0V (stop test when fulfills either condition). (2)Charge at 3C current until the voltage of some single battery reaches 10.0V, then stop the test. | The battery shall not explode or catch fire. |
|
|
| 2 | Over-discharge test | Charge the battery. Place at 20±5℃ for 1h, then discharge in 1/3C current at same temperature until so cell’s voltage is 0V. | The battery shall not explode or catch fire. |
|
| 3 | Short-circuiting Test | After charge batteries, place at 20±5℃ for 1h. Short the battery for 10min, the external circuit resistance should be less than 5mΩ. | The battery shall not explode or catch fire. |
|