Welcome Customer !

Membership

Guangzhou Ruid Ele-tech CO., LTD.
Free Member ·1YRS
,
Other

Main Products: 光纤通信设备

Xwboo>Products

1310nm SOA Optical Amplifier

Model
Nature of the Manufacturer
Other
Product Category
100G SOA Optical Amplifier
Place of Origin
City, Province
Overview
Support O-band, 1260~1340nm or 1480~1510nmMax output power 13dBmSupport ACC and AGC)19inch 1U mounted rack220VAC or -49VDC power suply
Product Details

100G 1310nm SOA Optical Amplifier


O-band 1310nm 100G SOA optical amplifier can amplify optical signal with wavelength 1270~1330nm. The product has two operation modes: ACC and APC. The product features as stable output power, low NF and low PDG. This series SOA can support optical amplification with date rate under 160Gb/s.


Parameter

Parameter

Condition

Min

Typ

Max

Unit

Wavelength Range

40GE

1260

1340

nm

Wavelength Range

100GE

1290

1320

nm

Total Input power

-20

-10

dBm

Saturation Output Power

10

dBm

Gain

14

dB

Gain ripple

7.5

dB

Noise Figure

2

dB

PDG

-5

50

℃

Operating Temperature

5

95

%

Operating Humidity

-40

85

℃

Storage Temperature

220VAC,-48VDC

V

Power Consumption

1 SOA

10

W

2 SOA

20

W

4 SOA

40

W

Dimension

1U 19’’ 482.6x245x43.6

mm

Connector

Can be Custermerized

Order Information

Part No.

Type

RD-SOA-A1-1310-10/GXX

SOA 1 in 1 out

RD-SOA-A2-1310-10/GXX

SOA 2 in 2 out

RD-SOA-A4-1310-10/GXX

SOA 4 in 4 out

Application


Case 1: 100G long distance optical link transmission


100G 1310nm optical amplifer


The transmission distance of traditional 100GBese-LR4 optical link is limited to 10km. In the transmission of long distance or high loss optical fibers, SOA optical amplifier can be configured to amplify the weak optical power signal on the receiving side to meet the receiving requirements of the equipment.

Case 2:Data link acquisition amplification



In the application of data link acquisition, the optical signal of 100G replication link should usually go through a secondary splitting. The SOA optical amplifier can be configured to amplify the optical signal of the replication link before secondary splitting to ensure that the optical signal after secondary splitting meets the transmission requirements,


Similar Product Recommend