Welcome Customer !

Membership

Guangzhou Zhengneng Eetronic Technology Co. Ltd.
Free Member ·1YRS
,
Other

Main Products: 电力检测设备

Xwboo>Products

Guangzhou Zhengneng Eetronic Technology Co. Ltd.Free·1YRS

  • E-mail

    hsh@znele.com

  • Phone

  • Address

    Address, 4F, No.771 Guangcong 8th Road, ZhongLuoTan, Baiyun District, Guangzhou, Guangdong, China

Contact Now

Non-contact phase sequence meter

Model
FR2060
Nature of the Manufacturer
Other
Product Category
Other Lightning Protection Met
Place of Origin
City, Province
Overview
Non-contact phase sequence meter
Product Details
FR2060 non-contact phase detector is a major breakthrough in traditional phase sequence detection methods.The traditional phase sequence detection must be to open the three-phase wire terminal, the phase sequence table of the three exposed clips or test pins are connected to the exposed three fire lines. The FR2060 uses clamp-type non-contact inductive measurement. It does not need to open the wire, and does not need to touch the high voltage exposed live wire. It can directly detect the phase sequence by sandwiching the three super induction high-insulation clamps to clamp the three-phase live wire insulation sheath.At the same time, the acousto-optic indicates the normal or reverse phase state of the phase sequence of the three-phase power supply.
FR2060 non-contact phase detector also has functions such as live line inspection, easy power inspection, open circuit search, break point location, and line maintenance.。
FR2060 non-contact phase detector detects quickly and easily, shows at a glance, greatly improves the safety of field tests, effectively protects the personal safety of operators, and increases productivity! It is a safety instrument for phase sequence, motor detection and line maintenance of three-phase power supply!
FunctionPhase detection (normal phase, reverse phase), live line inspection, simple electricity inspection, phase loss judgment, circuit breaker search, breakpoint location, and line maintenance.
Power9V battery, continuous use time is about 70 hours.
Measure modeNon-contact clipping method
Wire positionThe measured wire is in the center of the jaw
Frequency50Hz/60Hz Automatic Identification
Live electricity rangeAC70~1000V,45/65Hz(Sine wave continuous input),Conducted electrostatic detection
Measuring the highest voltageAC1000V
Clamp wire sizeOutside diameter ø1.5mm~ø48mm
Display【Positive phase】4 phase detector lights are turned on in a clockwise direction;
【Reverse phase】4 4 phase detection lights are turned on counterclockwise;
【Live electricity】L1, L2, L3 lights in the voltage setting range;
【Lack of phase】L1 or L2 or L3 lights are not lit;
【Open circuit】L1 or L2 or L3 lights are not lit
Beep【Positive phase】The instrument emits intermittent short beep;
【Reverse phase】The instrument emits a continuous long beep。
Battery checkAfter the power is turned on, the power indicator is on; the battery is low; the LOW BATTERY lamp is on。
Clamp lead length0.6m
Instrument sizeL 117.6mm×W 81mm×T 25mm
Automatic shut-downAfter about 6 minutes of power on, the meter automatically shuts down to reduce battery consumption.
Battery voltageWhen the battery voltage drops to about 5.2V, the battery voltage is low symbol to remind to replace the battery
Instrument weightInstrument:260g(including battery)
Maximum rated power300mVA
Working temperature and humidity-10℃~55℃;below 80%rh
Storage temperature and humidity-20℃~60℃;below 90%rh
Insulation strength3.7kVrms
Suitable for Safety RegulationsEN61010-1:2001、EN61010-031:2002、pollution grade 2、CAT Ⅲ(600V)、Instant overvoltage 6000V。
Instrument1PC
Instrument bag1PC
Detector battery9V Alkaline battery 1PC
Manual, certificate1SET
Similar Product Recommend