Welcome Customer !

Membership

Wenzhou Yibaiyi Electromechanical Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 测试仪器

Xwboo>Products

Wenzhou Yibaiyi Electromechanical Equipment Co., Ltd.Free·1YRS

  • E-mail

    1762752588@qq.com

  • Phone

    0577-57151533

  • Address

    Zhiguang Industrial Zone, Liushi, Wenzhou

Contact Now

Vertical digital display scale

Model
Nature of the Manufacturer
Other
Product Category
Caliper Series
Place of Origin
City, Province
Overview
Vertical digital display scale
Product Details

Digital display vertical ruler manual

Product use: Widely used in various industries, and used in conjunction with various tooling fixtures, testing instruments, machine tools, etc.

1. Measurement range: see the table below;

2. Resolution: 0.01mm / 0.0005 ";

3. Working power: 3VCR2032 battery;

4. Measurement speed: <3m / s;

5.Working conditions:

Operating temperature 0 ~ + 40 ℃; relative humidity ≤80%
Storage and transportation temperature: -10 ~ + 60 ℃;

6. Key functions:

a. Power switch

b. Clear data at any position

c. Data retention function during relative measurement

d. Conversion of relative and absolute measurements

e. Metric and English conversion

Measuring range (mm)

Resolution (mm)

Accuracy (mm)

L1 (mm)

L2 (mm)

0-100

0.01mm / 0.0005 "

0.02

263

239

0-150

0.01mm / 0.0005 "

0.03

318

294

0-200

0.01mm / 0.0005 "

0.03

368

344

0-300

0.01mm / 0.0005 "

0.04

468

444

7, performance characteristics:

a. When machining or machine tool assembly, measure and position the assembly assembly fixed on the fixture.

b. It can be fixed at any position.

c. Data output.

d. Fast response speed (3m / s), no over-speed error fault occurs,

e. No power-on crash occurs.

8. Matters needing attention:

a. Avoid using in dusty places as much as possible during use, and avoid being exposed to sunlight ultraviolet rays and high temperature radiation.

b. Move the ruler frame to balance and avoid falling collision.

c. Do not place the caliper on a magnetic object. The workpiece should be measured after demagnetization.

d. The measuring surface can be scrubbed with gasoline or alcohol. The surface of the electronic components and ruler body should avoid any contact with the solution.

Similar Product Recommend