Welcome Customer !

Membership

ACEPOM GROUP
Free Member ·1YRS
,
Other

Main Products: 检测仪器

Xwboo>Products
Product Categories

ACEPOM GROUPFree·1YRS

  • E-mail

    shawn@acepom.com

  • Phone

    +86-0523-84268368

  • Address

    68 SOUTH RENMIN ROAD, JINGJIAGN,JIANGSU,CHINA.

Contact Now

induction bearing heater ZJ20X-2

Model
ZJ20X-2
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
induction bearing heater ZJ20X-2
Product Details

Bearing heater parameter performance:

Adjust power, auto erase

Environmental protection, no soot pollution

Save money, save time, save electricity, save oil and improve assembly quality

Reliable, simple operation, uniform heating, no fire danger

Selection form of ZJ20X series bearing heater:

Model

ZRQ-2

ZJ20X-1

ZJ20X-2

ZJ20X-3

ZJ20X-4

ZJ20X-5

Power (KVA)

2.8

3.3

5

7.5

11

13

ID Ø: mm (mm)

30-180

30-100

70-200

70-250

150-360

180-400

Max. OD Ø: (mm)

300

280

360

400

450

500

Max. width: (mm)

90

115

150

180

200

200

Standard yoke(mm)

20,30,60

20,30,40

40,60

40,70

80

80

Control mode

Temperature control, hand control,Time control

Shifting roller

yes

Temperature display

yes

Magnetic temperature measuring probe

yes

Automatic power regulation

yes

Automatic demagnetization

yes

ZJ20X series bearing heater operation guide:

1, yoke will be placed on the end of the column.

2. Plug the plug into the power outlet of the control switch.

3, check the grounding wire is good, energized by the test pencil test.

4, press the start button, the host power on.

5, check the yoke should be no voltage to the ground.

6, press the stop button, the main machine power failure, stop heating.

7, according to the different specifications of the bearing or other items, choose different sets of yoke, the yoke on the top surface of the host, should be smooth.

8, heating, the sensor should be inserted into the "sensing socket", and the sensor close to the heating workpiece.

9. When the bearings are heated to the desired temperature, they will automatically turn off the power supply or press the stop switch.

10, stop heating, move the yoke to the left or right, remove the bearing.

1, if repeated use, uninterrupted heating bearings, bearings will only need the processed and then set into the yoke, click on the start button.