| Designation | TIH 220M/LV | |
| TIH 220M/MV | ||
| SKF m20 performance | 220 kg (480 lbs) | |
| Voltage, V/Hz | TIH 220M/LV: 200-230V/50-60Hz | |
| TIH 220M/MV: 400-460V/50-60Hz | ||
| Bearing: | - Maximum weight | 300 kg (661.4 lb) |
| - Maximum bore diameter | 60 - 600 mm (2.3 - 23.6 in.) | |
| Temperature control: | - Range * | 0 - 250 °C (32 - 482 °F) |
| - Magnetic probe | Yes, K-type | |
| - Accuracy (electronics) | ± 2 °C (± 3.6 °F) | |
| Time control: | - Range | 0 - 60 minutes |
| - Accuracy | ± 0,01 sec. | |
| Performance example: | - bearing, weight, temperature, time | 23172 CC/W33, 220 kg, 110 °C, 20m |
| Thermometer mode | Yes | |
| Bearing mode (pre-set at 110 °C/230 °F) | Yes | |
| Power reduction | 2-step; 50 - 99% | |
| Demagnetisation according to SKF norms (automatic) | Yes (<2 A/cm) | |
| Can heat sealed bearings | Yes | |
| Can heat pre - greased bearings | Yes | |
| Error guiding codes | Yes | |
| Thermal overload protection | Yes | |
| Maximum magnetic flux | 1,55 T | |
| Control panel | Key board with LED in remote control | |
| Operating area (w × h) | 250 × 255 mm (9.8 × 10 in.) | |
| Coil diameter | 140 mm (5.5 in.) | |
| Dimensions (w × d × h) | 750 × 290 × 440 mm (29.5 × 11.4 × 17.3 in.) | |
| Total weight, including yokes | 86 kg (189 lbs) | |
| Maximum power consumption | 10,0-11,5 kVA (400-460V) | |
| Number of standard yokes | 2 | |
| Standard yokes | 70 × 70 × 430 mm (2.8 × 2.8 × 16.9 in.), for heating bearings with bore diameter of 100 mm (3.9 in.) and larger | |
| 40 × 40 × 430 mm (1.5 × 1.5 × 16.9 in.), for heating bearings with bore diameter of 60 mm (1.6 in.) and larger | ||
| Core cross section | 70 × 70 mm (2.8 × 2.8 in.) | |
| Yoke storage | Yes | |
| Sliding arm | Yes, 70 x 70 x 430 mm (2.8 x 2.8 x 16.9 in.) yoke only | |
| Swivel arm | No | |
| Cooling fan | No | |
| Housing material | Steel and glass fibre filled polyamide | |
| * Maximum heating temperature capacity depends on the weight and geometry of the bearing or workpiece. The heaters can achieve higher temperatures, please contact SKF for advice. | ||
-
E-mail
shawn@acepom.com
-
Phone
+86-0523-84268368
-
Address
68 SOUTH RENMIN ROAD, JINGJIAGN,JIANGSU,CHINA.
,




