Tower-type Induction Heater
Voltage: 220V / 50Hz
Power: 2 KW
Adaptation bearing diameter: 20~120mm/260mm
The greatest weight : 15Kg
Other parts: 10Kg
Tower-type Induction Heater
1. Working condition:
i. Voltage: AC220V
ii. Max current: 10A
2. Advantages:
i. Housed in a completely shielded, compact, robust metal casing with the lowest magnetic field raditions.
ii. Adopting the Air-cooling method, which avoiding the inconvenience of assembly and maintenance for the water cooling method.
iii. High efficient, the small workpieces can be heated up to 200C within 5-15s, it can be worked with the manipulators and suitable for the assembly line working. It can also be tailor made solutions combining robot applications with heating and joining units. For example: camshaft assembly, etc.
iv. Working with the supersonic frequency, no noise pollution.
v. The exact temperature control and the constant temperature hold are included, the range of heating temperature is from 0-400C, the induction heater can be stopped automatically at the setting temperature.
vi. Timing heating mode is available within 99min59sec.
vii. Auto-demagnetization.
viii. Up-to-date microprocessor technology for minimal power consumption. Ease of operation for maximum process control.
3. Scope of specification:
i. Typically heating the ring shaped metal workpieces, such as bearings, gears, sheft-couplings, etc. (the external closure workpieces is also available.)
ii. Heating positions: ID: 20-120MM
iii. Max OD:260mm
iv. Max thickness: 120mm
advantages of induction heaters are as fallows:
Fast and controllable heating process
Safe heating process
Only workpiece is heated
No messing around with dangerous hot oil
No risk of(local)over heating
Suitable for ee or zz bearings(no risk of grease leakage)
Can be used to pre-lubricate bearings
Compared with the similar products,the advantages ofinduction heaters are as follows:
Fast heating process through high output,Cos phi>0.8,
Adopting the frequency conversion technology,and making to heat the small workpiece is possible,at the same time,solving the problem of heating the blind holes in aluminium workpiece.
Ensure an equal temperature all over the part(inner and outer ring)
All heaters are continually woking without any optional cooling systems.There aremore than 10years for ACEPOM Instruments has been in the field of Bearing induction heater and small induction heater.We guarantee a fast,safe and controlled way to heat up the bearings,bushings,gears,pulleys,couplings or other parts with our continuous innovition in technology.
ACEPOM Instrument,the pioneers in the use of induction applications.Compared with traditional heating methods,the advantages of ACEPOM induction heaters are as fallows:
Fast and controllable heating process
Safe heating process
Only workpiece is heated
No messing around with dangerous hot oil
No risk of(local)over heating
Suitable for ee or zz bearings(no risk of grease leakage)
Can be used to pre-lubricate bearings
Compared with the similar products,the advantages of ACEPOM induction heaters are as follows:
Fast heating process through high output,Cos phi>0.8,
Adopting the frequency conversion technology,and making to heat the small workpiece is possible,at the same time,solving the problem of heating the blind holes in aluminium workpiece.
Ensure an equal temperature all over the part(inner and outer ring)
All heaters are continually woking without any optional cooling systems.