Motor is widely used in industrial and agricultural production, a considerable number of long_term use, it is inevitable to break down, such as not found in time, often lead to production and economic losses.It is a common concern of equipment maintenance personnel to have a simple and quick tool to detect potential faults of motors.
ACEPOM350, a motor fault detector, has added advanced testing methods such as phase Angle detection and frequency doubling detection in its functions, thus greatly improving the diagnostic rate of the instrument and extending its application range from three_phase winding to single_phase winding, dc winding and capacitor detection and diagnosis.The instrument USES a liquid crystal display with automatic backlight for digital display, the display result is clearer and more convenient to use.The instrument is beautiful and easy to carry.The voltage of insulation detection is also increased from 500 v to 1000 v, which is more in line with the requirements of motor insulation detection.
It is suitable for fault detection of windings of single_phase, three_phase ac motor, dc motor, transformer, generator and single coil and capacitor of any type.
The test contents include the insulation between the windings and the windings to the shell, the short_circuit and open_circuit of the windings themselves, the balance of the three-phase windings and the phase Angle of the windings and capacitors, etc.
Parameters :
1、Scope of application: inductance: 0.28mh ~ 1.8h;Capacitance: 100 F ~ 60nF;Impedance: 3 ~ 1000 Ω;Phase Angle: 0 ~ 90°;Insulation: 0 ~ ∞;
2、Signal source: frequency: 100hz, 300hz, 900hz, 2400Hz;Maximum output: 6V, 500mA;
3、Insulation test voltage: 1000V;
4、Power supply voltage: 12V DC (rechargeable nickel-cadmium battery pack);
5、Feet: 210mm×120mm×43mm;
6、Weight: about 650g;
7、Ambient temperature: -10 ℃ ~ 40℃;Relative humidity should not be greater than 80%
Main detection contents:
1、Three phase motor stator winding detection: phase impedance balance detection, phase Angle balance detection, phase octave impedance balance detection.
2、Detection of single-phase winding: frequency doubling detection, phase Angle detection.
3、Motor rotor detection
4、Dc motor detection
5、Insulation testing
6、Capacitor detection: frequency doubling detection, phase Angle detection