Welcome Customer !

Membership

ACEPOM GROUP
Free Member ·1YRS
,
Other

Main Products: 检测仪器

Xwboo>Products
Product Categories

ACEPOM GROUPFree·1YRS

  • E-mail

    shawn@acepom.com

  • Phone

    +86-0523-84268368

  • Address

    68 SOUTH RENMIN ROAD, JINGJIAGN,JIANGSU,CHINA.

Contact Now

ACEPOM362 Ultrasonic leak detector

Model
ACEPOM362
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
ACEPOM362 Ultrasonic leak detector
Product Details

ACEPOM362 is ACEPOM group developed a ultrasonic detection system using the principle of ultrasonic detection of leakage of high_tech product, the product developed by our r&d center in Brussels, Belgium, and production and manufacturing, maintenance and quality control for industry to provide high_tech leak detection, air tightness test and predictive maintenance system of measurement.


Detailed introduction:

Ultrasound is a sound that cannot be heard by the human ear. In other words, frequencies above 20KHz are sounds that cannot be heard by the human ear.It is because of this characteristic of ultrasound, the equipment state of the cross technology diagnosis, to ensure the correct trend and management of state maintenance.

Main features:

  • High precision, good repeatability

The success of any state maintenance plan and implementation depends on valuable data.It has the functions of real-time detection and data acquisition, and has the incomparable precision and repeatability, which can achieve real-time detection of operating equipment.


Multi-function

Redefined the power of ultrasonic detection, but also redefined the power of multifunction.Extend the range of human hearing to the extreme!It can detect not only the local discharge fault of all electrical equipment, and can detect the wear fault of all rotating machinery, and evaluate its lubrication state, at the same time by can detect the pressure vessel and pipeline leakage of internal and external gas and liquid, become the industrial steam liquid plugging efficiency of energy saving center.It is a system that meets your current budget and expands and upgrades to meet your future needs, putting the latest technology in your hands, both now and in the future!


Intelligence

The ACEPOM362 ultrasonic detection system can connect and automatically identify different sensors, and simultaneously detect a variety of process parameters such as temperature, flow rate and rotation speed of the equipment, which means that fewer buttons are pressed and higher work efficiency is achieved.

The acep m 362 ultrasonic detection system extends the range of human hearing to...

-More functional

-Easy to use

-One of the most competitive industrial preventive maintenance instruments


Measurement function of ACEPOM362 ultrasonic detection system:

■ Valve leakage, hydraulic system leakage detection
■ Pump cavitation detection, air compressor internal leakage detection
■ Detection of trap failure
■Compressed air leakage detection, boiler, heat exchanger and condenser leakage detection
■Boiler fail-safe door search
■ Wind noise and water leakage detection
■Bureau inspection of electrical equipment: GIS switch drive mechanism fault search, insulator pollution flasm and internal crack detection, cable joint local discharge detection, GIS/GCB and switch cabinet, power cabinet, communication cabinet internal local discharge fault detection, transformer, bus bushing, CT/PT, capacitor and reactor local discharge detection, SF6 gas leakage detection


Parameters:
■ Standard built-in ultrasonic sensor

■ Built-in infrared temperature sensor

■ Built-in laser positioning

■ An external sensor channel interface to connect additional optional sensors

■Internal memory of 400 node locations to store static measurements

■ Standard USB conntection


Field application:

1、Gas leak detection without distinction of gas type - applied to any gas leak detection

If a container or pipe is filled with gas, when the internal pressure is greater than the external pressure, the pressure difference between inside and outside is large, and once the container has a leak, the gas will burst out of the leak.When the small size of leak hole and high Reynolds number, out of the gas can form turbulence, turbulence near the leak will produce a certain frequency of sound waves, sound wave vibration frequency is associated with leakage hole size, hole leakage larger people ears to hear the leak leakage hole is small and acoustic frequency is greater than 20 KHZ, ear wouldn't listen to it, but they can spread through the air, called the no_load ultrasound.Ultrasonic wave is a high frequency short_wave signal, its strength decreases rapidly with the increase of the propagation distance.Ultrasound has directivity.Using this feature, the correct leak location can be determined.


2、Leak detection of valves and hydraulic systems - used for finding leaks in valves and hydraulic systems

Accurately detect blockage or leakage inside valve while system is online.Use the ACEPOM362 ultrasonic inspection system to check for hydraulic circuit failures to find internal leaks quickly and easily.The acep m 362 ultrasonic detection system "contact mode" takes sample readings along the loop.The detector can clearly define the flow direction and, more importantly, the source of the fault, even in areas of high noise.Leaks through the inside of the seal on the hydraulic plunger create tiny bubbles in the oil, which in turn "burst" as they move from the pressure side to the non_pressure side.These small explosions generate ultrasonic energy, which is easily detected by the acep m 362 ultrasonic detection system.And the ultrasonic interference is eliminated by adjusting the frequency of the detector.

Typical customer case reference: on-site valve leakage detection in xinjiang karamay petrochemical co., LTD

Typical customer case reference: on-site valve detection and gas leakage detection of China Yangtze petrochemical


3、Wind noise and water leakage detection     

Rigorous integrity assessment for aircraft, auto shells, ships and internal containers quality control applications developed for the transport sector, the military sector and basic industries to improve the tightness of vehicles, aircraft, ships, etc.The ultrasonic transmitter is placed inside the container. Due to the characteristics of the ultrasonic wave, these waves can penetrate the holes. Outside the container, the ultrasonic detection system ACEPOM362 can be used to detect the defects.


Application scope:

Marine industry -- cangkou cover for cargo ships

Cars - cars leak air and water

Aviation - integrity of aircraft and helicopters

Traffic - the strictness of trucks, buses and trains

Nuclear facilities - external wall integrity of the building

Military - submarines, aircraft, spacecraft


4、Detection of underground tank tightness

With the continuous development of industrialization, soil pollution has become an important problem in the world.

Most countries now have laws and regulations designed to identify and assess risks and to avoid soil contamination and any new contamination.In view of possible soil contamination, such as groundwater, storage or vehicle fuel, fuel oil or dangerous liquids in underground containers are increasingly subject to stringent operating conditions.Strict and regular tightness monitoring is an effective guarantee for soil and personnel safety.  

The aim is to be able to identify any leaks quickly to limit all hazards and contamination.If leakage occurs, it may require a lot of labor and resources to clean the surrounding subsoil, often resulting in relatively expensive treatment and work.

The effect of the device can be well verified by the service.

 The acepom 362 ultrasonic testing system is the most reliable, comprehensive and accurate for the inspection of the tightness of underground flammable liquid storage tanks and related pipeline works.With the ACEPOM362 ultrasonic detection system software all data and inspection measurements are stored in the detector for automatic establishment of verification reports.They can be transferred to a computer.And provide data, check, measure readings and graphs and archive performances.


5、Industrial equipment maintenance inspection, precision inspection, patrol inspection

High precision, good repeatability

  The success of any in_state maintenance plan and implementation depends on the invaluable data provided by the acep m 362 ultrasonic detection system with unparalleled accuracy and repeatability.Can you achieve 99% running time?From the equipment condition maintenance and spot check wizard - acep m 362 ultrasound detection system to take you one step closer.


Multi-function, flexibility

  Only the acepom 362 ultrasound detection system in the world can provide a package of state maintenance solutions.It redefined the power of ultrasound detection, and it redefined the power of versatility.Extend the range of human hearing to the extreme!It can detect all the electrical equipment failure, and can detect all wear faults of rotating machinery, and to evaluate its lubrication state, and also can detect pressure vessel and pipeline gas and liquid leakage inside and outside, become industrial enterprise plugging efficiency of the energy conservation center. It is a meet your current budget system again with your future demand and expand, upgrade, the present and future of the latest technology in your hands

Intelligence: the acep m 362 ultrasonic detection system can automatically identify the connected sensors.This means pressing fewer buttons and working more efficiently.Just plug in the sensor and the rest of the acep m 362 ultrasound system will do it for you.

It is a system that meets your current budget and can be expanded and upgraded to meet your future needs, putting the latest technology, present and future, at your fingertips.

Rugged: the ACEPOM362 ultrasonic detection system is designed to withstand severe damage by easily passing a 3_meter drop test.Enclosed in an aluminum casing and protected by vibration_resistant rubber, the electronics inside are isolated from the harsh environment of the factory floor.

Economy: the acep m 362 ultrasonic detection system is designed for one_handed use.All functions are controlled by an eight_key touch keyboard that can be manipulated with the thumb.A generous LCD screen displays all the parameters in eight or more languages.


ACEPOM362 ultrasonic detection system has a powerful expansion performance

Unlimited industrial applications - limited only by imagination

Compressed air leak detection     

  Compressed air leakage is one of the biggest waste in the factory;At the same time, the leakage will cause the system pressure to reduce, or even cause the actuator to slow down or refuse to move;Also will cause the compressor load increase, waste 10%_15% of the electrical energy, shorten the life of the air compressor.Therefore, compressed air systems should be inspected regularly (at least 3_4 times a year) to detect leaks and repair them.However, the leakage gas is colorless and odorless, and the noise generated by the leakage cannot be heard in the factory environment, which makes it difficult for people to detect.The ACEPOM362 ultrasonic detection system USES advanced digital purification technology to detect compressed air leakage, and converts the high frequency ultrasound that cannot be heard by human beings into the sound that can be heard.Make leak detection simple and easy, even in the most noisy industrial environment can be detected, compressed chamber quickly into the center of interest, for you to save a lot of money.


Bearing condition monitoring       

  The monitoring of friction directly indicates the relative health status of the equipment. By tracking the high_frequency friction with ultrasonic detector, the lubrication status of the equipment and the operating status information of other mechanical components (bearing, gear, coupler, pump impeller) can be obtained.Periodic inspection, as part of predictive maintenance, detects faults well before low-frequency instrumentation.Early fault alarm, reasonable planning, greatly save the maintenance cost of emergency.

Use the measurement data, then download the PC, status tracking and alarm monitoring.At the same time, a non_contact temperature measurement probe or a contact temperature measurement module can be selected to detect temperature parameters, which is helpful for the accuracy of comprehensive diagnosis results.


Lubrication monitoring         

AVM- acoustic vibration monitoring tracks the high_frequency bearing energy to determine the correct lubrication interval and to predict when the bearing enters its first wear phase.

  Overlubricated bearings can destroy the seal, accumulate pressure on the bearings, and cause premature failure.Too much oil to the motor can squeeze lubricant into the winding coil, causing short circuit and more serious damage.Under the lubrication condition, bearing has a negative effect on the life cycle of rotating machinery.So how do you make it fit?The acep m 362 ultrasonic system will tell you how much oil is enough.

  When the increase relative to the reference data exceeds 8dBuV, it indicates that the bearing needs lubrication.The contact probe is used in the process of oiling, and the sound vibration monitoring during the bearing lubrication process can ensure the proper amount of lubrication and prevent excessive lubricating oil.

Steam valve inspection          

  Rising energy consumption makes steam an expensive facility.The most typical failure is valve failure, accounting for 30_40%.Faulty valves also provide contaminated low-quality steam as well as dangerous water hammers.

  The ACEPOM362 ultrasonic inspection system gives the inspector an "internal view" of the valve, translating the high_frequency ultrasonic noise into the localized audio of the contact source, so that the inspector is not disturbed by the downstream environmental noise.

  Temperature measurements above and below the steam valve are usually used to warn of a faulty trap.Inspection of the steam valve can be further enhanced by selecting a non-contact temperature measurement probe.



Valve and hydraulic system

When the system is online, a blockage or leak inside the valve can be accurately detected.Use the ACEPOM362 ultrasonic inspection system to check for hydraulic circuit failures to find internal leaks quickly and easily.The "contact mode" of the acep m 362 ultrasonic detection system takes sample readings along the loop.The technician can clearly define the flow direction and, more importantly, the source of the fault, even in high noise areas.A leak through the inside of the seal on the hydraulic plunger creates tiny bubbles in the oil, which in turn "burst" as they move from the pressure side to the non-pressure side.These small explosions generate ultrasonic energy that is easily detected in the headphones of the type 170 device status patrol.Adjust the frequency of the detector to eliminate interference from the ultrasound.

Pump cavitation

Cavitation is usually the result of the pump being required to operate in conditions beyond its specification.Stingy point in the impeller behind the development.These bubbles have a damaging effect on the internal components of the pump, including erosion of the impeller surface and scarring.

Maintenance personnel in pulp mills, chemical plants and water treatment plants are well aware of the destructive effects of cavitation on pump components.The ultrasonic detector can detect the cavitation phenomenon in the early stage.Cavitation is examined more frequently in routine predictive maintenance plans using ultrasound.Press the contact probe against the pump housing, and listen to the sound of bubble blasting through the detection instrument. If the phenomenon is serious, the sound of failure resembles that of the popcorn machine in the cinema.This kind of detection work can save huge potential consumption.

Leakage of boiler, heat exchanger and condenser

External pressure or vacuum leakage in boilers, heat exchangers and condensers is scanned with the ACEPOM362 ultrasonic detection system.Listen to the same noises about compressed gas and vacuum leaks.All pipe connections, flanges, seals, and entrances and exits should be inspected as part of regular predictive maintenance.

Pipeline leaks in the condenser and heat exchanger can be checked by pressure, vacuum, or dual acoustic transmitter methods.Choose the method that suits your application and look at the dramatic reduction in your inspection time.

Reciprocating compressor

Reciprocating compressor valves open and close to allow the internal combustion engine to "breathe".When these valves get dirty or charred, their efficiency decreases.Although defective valves are characterized by the familiar noise or turbulence of leaks, valves properly positioned should be quiet.The signal from the valve can be analyzed using the software of the acep m 362 ultrasonic detection system.Real-time waveform analysis will reflect the severe sawtooth peaks that represent valve leaks.Use the ACEPOM362 ultrasonic detection system MD and data management software to track these trends and save them to the PC.

5. electrical inspection -- applied to the power industry:

When the air around the insulator is ionized, a chemical reaction occurs that corrodes the metal parts and weakens the insulation.The high energy generated by corona discharge can cause severe damage to mechanical components, cause unintended shutdowns and affect thousands of service customers, and can seriously lead to fires and explosions.In particular, fires and explosions caused by electrical causes in factories can have serious chain reactions due to the presence of dangerous and toxic chemicals on site.

Using the traditional infrared imaging technology, the hot spot phenomenon which cannot be observed by the naked eye can be found.However, the phenomena such as corona, electric arc and electric mark are not always accompanied by obvious heating phenomenon.And high ambient temperatures mask these phenomena.However, these images produce significant ultrasonic noise, which can be detected with ultrasonic detection equipment.The ultrasonic inspection system improves the insulation inspection, so that you can detect the sound of insulator fault, wire sleeve, transformer, end sleeve, lightning rod and so on.Ultrasonic detection of high pressure system makes up for the shortage of thermal imaging technology.

Application scope:

● transmission and distribution lines

● substation inspection

● switch drive

Low transformer

● partial discharge

Flash arc, leakage trace and corona

● radio/TV interface

Electrical faults emit ultrasonic waves at the point of failure to scan an area for leaks. A variety of characteristic deep-fried sounds, booms, and buzzes can be associated with different faults, and fault libraries can be built by recording sound waves.

Item

Standard configuration

Qty

ACEPOM362-200

Host

1

ACEPOM362-201

Headset

1

ACEPOM362-202

Built-in ultrasonic sensor

1

ACEPOM362-203

Main engine charger

1

ACEPOM362-204

Instrument box

1

Item

Optional configuration

Remark

ACEPOM362-205

Butterfly sensor

The disc receiver is used to detect ultrasonic sources at great distances.Unique design, can effectively concentrate the measurement of distant wave source, has a strong directional.Powerful class II laser sight to pinpoint the source of the wave.The effective distance of the probe is more than ten meters, especially suitable for power line inspection, leak detection and other applications.

ACEPOM362-206

Flexible sensor

The flexible probe facilitates the inspection of compressed air pipes, switchboards, steam systems and mechanical components, ensuring personal safety and ease of use.The ultra-sensitive probe can be bent into any shape and can be used in any place where it is difficult to measure.

ACEPOM362-207

Contact sensor

The needle contact probe is a structural resonance probe for precise measurement of structural wave ultrasonic.This powerful and reusable contact probe was designed after extensive research.The probe probe is primarily used for mechanical data sets, but its use extends to include steam traps, pneumatics, and others.

ACEPOM362-208

Lubricating transducer

Lubrication sensor, based on the operation state and add lubricating oil program, has become the industry standard.Connect the oil gun to your ultrasonic probe, while adding oil, you can hear the change of ultrasonic wave, and determine the amount of oil.

ACEPOM362-209

One direction ultrasonic generator

Dual frequency transmitter is used to check the small size of the container or the large size of the container later spot check, it is very useful to check the sealing.It emits a dual frequency ultrasound that guarantees 99% full space and no standing waves.Available for inspection of boilers, heat exchangers, diesel engine inlet systems, shell leaks, etc.

ACEPOM362-210

Eight direction ultrasonic generator

The ultrasonic transmitter produces two high-frequency ultrasound waves with wavelengths small enough to pass through very small leaks.When the transmitter is placed in a container, the space is filled with ultrasonic waves.With a flexible probe in conjunction with the main machine, the seal of the scan joint and seal can be measured.This equipment is useful for seal testing of cars, trucks, buses, ships, trains, hospital cleanrooms and buildings.

ACEPOM362-211

Threaded sensor (including magnetic seat)

The threaded probe is a resonance probe used to accurately measure ultrasonic waves in the bearing of the mechanism.It is a powerful and repeatable contact probe designed after a lot of research.The probe can also be connected to an acoustic lubricant adapter to lubricate the mechanical bearings for real-time monitoring.

ACEPOM362-212

Horn extension probe

The horn extension probe is a combination of design and function, which effectively solves the problem of distance.The shape of the cone can collect ultrasonic waves more efficiently and focus them on the instrument's built-in ultrasonic probe.For air leakage, electrical fault and other empty, as long as the transmission through gas, the detection distance can be increased by 10 times.

ACEPOM362-213

Built-in infrared temperature measurement function


ACEPOM362-214

Flow sensor

Insert this low air flow probe into either channel and your ultrasonic probe becomes a flow meter.Can measure SCFM or SCCM.By carefully capturing 99% of the compressed air leakage flow, the inspector can estimate the potential cost of repairing the compressed air leakage.

ACEPOM362-SFW1

Data storage software

Data is stored on a PC, tabulated and used for analysis

ACEPOM362-SFW2

Recording and analysis software


ACEPOM362-EX

     Explosion-proof version

ACEPOM362 is available in ATEX explosion-proof version