Welcome Customer !

Membership

ACEPOM GROUP
Free Member ·1YRS
,
Other

Main Products: 检测仪器

Xwboo>Products
Product Categories

ACEPOM GROUPFree·1YRS

  • E-mail

    shawn@acepom.com

  • Phone

    +86-0523-84268368

  • Address

    68 SOUTH RENMIN ROAD, JINGJIAGN,JIANGSU,CHINA.

Contact Now

ACEPOM510 Digital display pulley alignment instrument

Model
ACEPOM510
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
ACEPOM510 Digital display pulley alignment instrument
Product Details

Digital belt pulley is a compact two - way SCR digital display belt pulley for easier, faster alignment belt.

The tool is installed in a few seconds, the laser line is projected to the belt disk, digital display can tell you exactly what you need to adjust the position of the machine.

Laser pulley on the right ACEPOM510, can be targeted automatically read the detected eccentric data, and ensure a good adjustment accuracy.This is enough to allow many users in the coming days to resolve issues such as belt wobble caused by belt eccentricity.

ACEPOM510 is suitable for most types of belts, such as v-belt, synchronous belt, flat belt and chain belt.It can also be used to center non - magnetic pulleys.

Poor alignment of belt pulley is easy to cause rapid wear of belt and belt pulley. The traditional method of using piano wire or cotton wire correction is not only time-consuming and labor-consuming, but also easy to cause error analysis due to Angle deviation.This pulley pair USES the principle of geometry three points into a plane, the laser transmitter and calibrator are placed on two pulley respectively, you can immediately check whether the pulley alignment.This pulley to the right emphasis on carrying light, easy to operate and economical price, single operation as long as less than 30 seconds to complete the installation of the instrument and get the right results, is a quick calibration pulley edge.

The specification

System function: belt pulley alignment correction function

Laser Class: visible light Class 2, power <1mW

Laser Angle: fan type laser transmitter, 78 degrees

Measuring distance: more than 10 meters

Applicable diameter: belt pulley diameter more than 60mm

Measurement accuracy: <0.5mm / 0.2 degree

Weight: 300 g

Power supply: no. 3 battery (1.5v) x 2

Standard equipment: laser main machine, calibrator, protective case, operation manual