ACEPOM3901 digital photoelectric tachometer in guarantee its non-contact, high accuracy, on the basis of adopting micro processing LSI circuit makes the speed in the process of maximum, minimum, the last value stored in the storage, through the push button switch, can display on the LCD screen in 16 mm, in turn, so long as you don't change the battery data will be kept until the next time measurement, replaced by the new measurements.
1. Features:
L streamlined appearance design, the body and palm perfect match, ensure more convenient and comfortable use.
L the use of microcomputer technology, photoelectric technology, anti-interference technology and other advanced technologies, without contact can accurately measure the value of speed.
L wide measurement range and high resolution.
L large screen LCD display, reading clear, ignoring the difference.
L automatic memory of the maximum, minimum and last display values of the measurement.
L when the battery voltage is below the specified value, it is automatically indicated.
The structure is solid and delicate.The machine is made of light weight and durable preferred electronic components, and the shell is made of light weight and hard ABS plastic.
2. Specification:
Test range: 2.5~20000 RPM (r/min)
Resolution: 0.1 RPM (2.5~~99,999 RPM)
1 revolution/min (over 1000 revolutions/min)
Measurement accuracy: ± (0.05%+1d)
Sampling time: 0.8 seconds (more than 60 revolutions per minute)
Range selection: auto switch
Memory function: automatically remembers the maximum, minimum and last display value.
Time base: quartz crystal
Effective range: 50mm~~250mm
Power supply: 4× 1.5v AAA um-3
Power consumption: approx. 45mA (during measurement)
Operating temperature: 0~50℃
Or: 190 * 72 * 37 mm
Weight: 220g (including battery)
Attachment: one portable box
The length of the reflection strip is 600mm
Manual
3. Measurement procedures
A) affix a reflection mark to the object under test.
B) press the measurement button to make the visible beam align with the target and the monitoring light is on.
C) when the display value is stable, release the measurement button. There is no display at this time, but the maximum value, minimum value and last display value of the measurement are automatically remembered in the instrument.
D) measured.
4. Precautions for measurement:
A) reflection mark: cut the 12mm square tape and paste one piece on each rotation axis.It should be noted that the non-reflecting area must be larger than the reflecting area;If the shaft is obviously reflective, it must be coated with black paint or black tape, and then affixed with a reflective mark;The surface of the shaft must be clean and smooth before a reflective mark is applied.
B) low speed measurement: in order to improve the measurement accuracy, when measuring very low speed, it is recommended that the user evenly affix more reflective marks on the measured object.At this point the reading on the display divided by the number of reflection marks to get the actual speed value.
C) if the meter is not used for a long time, please take out the battery to prevent battery decay and damage to the meter.
5. Parameters:
Display | 5 number large LCD display, word height 16mm |
Model | ACEPOM3901 | ACEPOM3902 | ACEPOM3903 |
Measure range | 2.5~~20000RPM | 2.5~~50000RPM | 2.5~~100000RPM |
volatility | 0.1RPM(2.5-100000RPM),1RPM(1000RPM or more) |
Accuracy | ±(0.05%+1digit) |
Sampling interval | 0.5秒(120RPM or more) |
Effective distance | 50mm~~250mm |
Working current | 50mA |
Storage | Automatically records the maximum, minimum, and final values |
Power | 4×1.5V 7AAA battery |