The ACEPOM vibration meter RSC-V10.CN
is mainly used to measure the three parameters of vibration displacement, speed (intensity) and acceleration of mechanical equipment. By using the data measured by the instrument on the bearing seat and comparing with the international standard ISO2372, or by using the standards of enterprises and machines, the current position of the equipment (fan, pump, compressor, motor, etc.) can be determined. Status (good, attentive, dangerous, etc.).
Since the mid-1980s, the instrument has been used by large and medium-sized enterprises in China. Up to now, it has sold more than 20,000 sets, and the rate of repairing is very low. It is an ideal spot-checking instrument.
Technical parameters:
Acceleration probe: piezoelectric shear acceleration probe
Measurement range: Acceleration: 0.1-199.9m/s 2
Speed: 0.1-199.9 mm/s
Displacement: 0.001-1.999 mm
Measurement accuracy: +5%+2 words
Frequency Range: Acceleration: 10Hz-1kHz (LO), 1kHz-15kHz (HI)
Speed: 10 Hz to 1 kHz
Displacement: 10Hz~1kHz
Display: 3/1/2 digital display, update speed 1 second, press MEAS key to measure, release the key to maintain
Signal Output: AC Output, Full Range 2V
Accessible headphone VP-37
Load impedance above 10K ohm
Power supply: 1 9V battery operates continuously for about 25 hours
1 minute automatic power off
Ambient temperature and humidity: - 10-50 C, < 90% RH
Dimension: 185 (H)*68 (H)*30 (D) mm
Weight: 250 g
Standard configuration:
1. One mainframe
2. One Battery
3. Probe Connection Line
4. Probe one
5. One ribbon
6. A manual
7. One long pole