It can be widely used in the production field to measure the surface roughness of a variety of machined parts.
* adopt computer technology, comply with GB/T 6062 and ISO, DIN, ANSI and JIS.When measuring the surface roughness of workpieces, put the sensors on the workpiece surface to be tested, by instrument internal drive mechanism drive the sensor do constant speed glide along the surface to be tested, sharp sensor through the built-in stylus feel the measured surface roughness, the workpiece is measured by the probe caused by the roughness of the surface displacement, the displacement of the sensor of the inductance coil inductance changes, thus in the output of the phase-sensitive rectifier and measured surface roughness into analog signals than columns, the signals are amplified and level after conversion into the data acquisition system, DSP chip will be data collected by digital filtering and parameter calculation,The measurement results are displayed on the LCD and can be communicated with the PC for data analysis and printing.
* multi-parameter measurement: ra.rz.rq.rt.
* high precision inductance sensor.
* rc.pc-rc.gauss. D-p four filtering methods.
* built-in lithium ion rechargeable battery and charging control circuit, high capacity.
* mechatronics design, small size, light weight, easy to use.
* with automatic shutdown function.
* this table can remember 7 sets of measurement data and conditions for next viewing or processing.
* with metric system conversion function.
* communicate with PC by "USB data cable output" and "rs-232 data cable output".
* provides Bluetooth Bluetooth data output selection.
Parameters:
display | Blue backlight, 4 - bit digital display, 10 mm LCD |
The measured parameters | Ra、Rz、Rq、Rt |
Measuring range | Ra,Rq:0.005~16.00 um / 0.020~629.9 uinch Rz,Rt:0.020~160.0 um / 0.078~6299 uinch |
precision | ± 10% |
Indication value variability | 6% |
Sensor | Measuring principle | inductive |
The radius | 5 um |
material | diamond |
load | 4 mN(1.6 gf) |
Angle | 90° |
Longitudinal radius | 48 mm |
Maximum drive stroke | 17.5 mm/ 0.7 inch |
Sampling length (optional) | 0.25 mm,0.8 mm,2.5 mm |
Driving speed | When measuring | When sampling length =0.25mm.Vt =0.135 mm/s |
When sampling length=0.8 mm,Vt =0.5 mm/s |
When sampling length =2.5 mm,Vt =1 mm/s |
return | Vt =1 mm/s |
Filter profile | Filtered profile | RC,PC-RC,GAUSS |
Unfiltered profile | D-P |
Resolution | 0.001 um when value < 10 um |
0.01 um when 10 um ≤ value ≤ 100 um |
0.1 um when value ≥ 100 um |
Evaluation length Ln | 1~5 L optional |
Automatic shutdown |
Memory function | 7 set |
The work environment | Temperature:0~50 ℃ Humidity:< 80 %RH |
Power | Built-in lithium-ion rechargeable battery |
Size | 140 × 52 ×48 mm |
Weight | 420 g |
Standard accessories:
1. The host...1
2. The small screwdriver...1
3. Adjustable bracket...1
4. Standard sample ASP-180......1
5. Standard sensor arp-100......1
6. The sensor case...1
7. The power adapter...1
8. Handheld portable box...1
9. The instructions...1
Optional accessories:
1. Deep slot sensor ARP-110
2. ARP-120 surface sensor
3. Measure the extension rod AER-150
4. Measuring stand ARS-1
5.RS232 or USB online cable and software
Bluetooth communication and software