Welcome Customer !

Membership

ACEPOM GROUP
Free Member ·1YRS
,
Other

Main Products: 检测仪器

Xwboo>Products
Product Categories

ACEPOM GROUPFree·1YRS

  • E-mail

    shawn@acepom.com

  • Phone

    +86-0523-84268368

  • Address

    68 SOUTH RENMIN ROAD, JINGJIAGN,JIANGSU,CHINA.

Contact Now

Ultrasonic hardness tester ACEPOM6810

Model
ACEPOM6810
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
Ultrasonic hardness tester ACEPOM6810
Product Details

ACEPOM6810 portable ultrasonic hardness tester is using the ultrasonic vibration principle to measure the hardness of a new type of intelligent instrument, it is mainly used for measuring metal rockwell hardness (HRC), bring their own transformation function, can be converted to the corresponding vickers (HV), brinell hardness (HB), according to the value with storage function, which is portable hardness tester, the only hardness tester of workpiece surface without damage.

Applicable objects:

The ACEPOM6810 portable ultrasonic hardness tester can be adapted to any shape and size of fine grain materials in the field. It has been widely used in the fields of electroplating, mechanical processing, automotive parts, aerospace, petrochemical, heat treatment, mold, bearing, crankshaft, gear, supervision and inspection and scientific research teaching, including:

Electrodeposited layer, nitrided layer, carburized layer, thin sheet metal, small parts and other portable hardness tester can not measure the workpiece

The workpiece without damage and indentation is required to be measured

Large workpieces which are not easy to move or parts which are not easy to disassemble and parts of special shape to be tested

Measuring principle:

ACEPOM6810 portable Ultrasonic hardness tester is based on Ultrasonic contact Impedance measurement principle, also known as UCI (Ultrasonic contact Impedance) method. Under uniform contact pressure, the resonance frequency of the sensor rod changes with the hardness of the specimen.The sensor rod in the probe is fixed with a large rigid body at one end and diamond-mounted at the other end.When the head is pressed on the artifacts, in the role of fixed load, for elastic modulus of the same workpiece, the lower hardness is, then the pressure head and the greater the contact area on the surface of the workpiece, thus damping rod sensor head the indentation size is large, and the end of the vibration amplitude is small, the resonant frequency is high, so through the change of the resonance frequency, can determine the workpiece hardness.

Technical parameters:

Measurement range: HRC 10-70

HV. 100-999

HB 100-540

Display precision: when rockwell hardness is displayed, the display precision is 0.1 HRC

Accuracy of indication: ±1.0 HRC (when HRC is 55-70)

Load: 10 nf + 1 nf

Pressure head specification: 136° diamond pressure head

Minimum width of measurable workpiece: 1mm

The thinest thickness of measurable workpiece: 2mm

Minimum thickness of measurable coating: 8um (chromium plating)

Power supply: AC 100-240v 50/60hz DC 6V supplied by rechargeable battery

Overall size: 180×95×40mm

Instrument weight: 700g

Standard configuration:

ACEPOM6810 portable ultrasonic hardness tester main machine, standard probe (including probe wire), test block, charger, manual, qualification certificate, warranty card, instrument box