ACEPOM6811 portable ultrasonic hardness tester conforms to din 50159-1, ASTM - a1038-05, JB/t9377-2010 and other German, American and Chinese standards.
It has the following characteristics:
No damage to the workpiece - no visible indentation on the surface of the workpiece
High measurement accuracy - up to ±1.0 HRC, or ±3%HV/HB
Fast measurement speed -- output test results within 1 second, suitable for full on-site inspection of large quantities of products
Stable performance - has been used in many domestic industries leading large Chinese and foreign famous enterprises
Wide test range - up to 1700HV
Can measure thin workpieces - such as chromium plating, nitriding, carburized surface, thin plate, thin wall tube, etc
Non - impact, can be measured gear, crankshaft, slewing bearings and other irregular shape of the workpiece
Bulk storage - 999 sets of measurements can be stored automatically
Wireless bluetooth printing - a miniature bluetooth printer can be configured to print test results on site
USB interface - can be connected to the computer through data software
Adaptive multiple probe (5 n probe, 30 n probe, Φ 4 mm small diameter probe), so as to adapt to different workpiece measurement requirements.
ACEPOM6811 portable ultrasonic hardness tester is using the ultrasonic vibration principle to measure the hardness of a new type of intelligent instrument, it is mainly used for measuring metal rockwell hardness (HRC), vickers hardness (HV), brinell hardness (HB), and automatic storage function with data and function of bluetooth print, is currently the portable hardness tester, the only hardness tester of workpiece surface without damage.
Applicable objects:
ACEPOM6811 portable ultrasonic hardness tester can be adapted to the field of fine grain materials of any shape and size of the workpiece, in electroplating, mechanical processing, automotive parts, aerospace, petrochemical, heat treatment, mold, bearing, crankshaft, gear, supervision and inspection and scientific research teaching and other fields are widely used including:
Electroplating, nitriding, carburizing, sheet or sheet metal, small parts and other portable hardness tester can not measure the workpiece
The workpiece without damage and indentation is required to be measured
Large workpieces that are not easy to move or parts that are not easy to disassemble and the test pieces of special shape (such as gear tooth surface, crankshaft, etc.)
Technical parameters:
Measurement range: HRC 20-70
20-1800 HV
60-680 - HB
Display precision: when rockwell hardness is displayed, the display precision is 0.1 HRC
Accuracy of indication: ± 1.0hrc (HRC = 55-70), HV/HB = ± 3% HV/HB according to German DIN 50159-1 standard
Load: 10 nf + 1 nf
Pressure head specification: 136° diamond pressure head
Data storage: 999 sets (5 measurements for each set)
Minimum width of measurable workpiece: 1mm
Thinnest thickness of measurable workpiece: 1.5mm (5N probe)
Minimum thickness of measurable coating: 8um (chromium plating)
Continuous working time: 8 hours (without backlighting and printing)
Power supply: 2000mAH 7.4v rechargeable lithium battery or 220V ac power supply
Overall size: 178×84×36mm
Probe length: 150mm
Weight of instrument (including probe) : 400g
Applicable ambient temperature: -10℃~50℃
Instrument configuration:
Main machine of instrument, standard probe (including probe wire), test block, charger, manual, qualification certificate, warranty card, instrument box
Optional configuration: Φ 4 mm small diameter probe (used in narrow area and small module gear), 5 n probe (used for thin pieces), 30 n probe (for rough surface),
Micro bluetooth printer, data software.