Welcome Customer !

Membership

Henan Senyuan Electric Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 电气设备

Xwboo>Products

SY680 Microprocessor Integrated Protection and Monitoring Device

Model
Nature of the Manufacturer
Other
Product Category
Microprocessor Protection Device & System
Place of Origin
City, Province
Overview
SY680 Microprocessor Integrated Protection and Monitoring Device
Product Details

Product Introduction

SY680 series integrated protection device provides large screen display, human-machine interface in Chinese character, operation box function, independent measurement CT and redundant star network communication mode. It is a highly cost-effective product.
This series of protection device is suitable for the distribution system with different grounding modes at 110kV and below voltage level. It can perform protection, control and monitoring functions for feeders, capacitors, reactors, motors and transformers.

The device is provided with a variety of flexible hardware types , such as: redundant RS485 communication card, redundant 100M Ethernet communication card, two-way 0~24mA analog output card, four-way 0~22mA analog input card, extended modules of switch input and output etc.
The front USB port provides users with remote maintenance and fault diagnosis. The user only needs to insert the USB flash disk into the device, then the relevant fault recording and tripping information will be exported. Our after-sales service personnel will analyze the type of fault and guide the user to handle it on the scene. Device configuration download and software upgrades can be completed through the USB flash disk.
The constant value of SY680 series device is set in complete accordance with domestic user habit. For example, over-current protection provides direction and compound voltage interlocking function and control word deblocking and blocking function. All switch input and output are predefined. As long as the user input the constant value from the panel, the device could work properly.
The integrated programmable logic tool (CFC) and user-defined protection feature allow the user to achieve special protection, interlocking, and custom information.
By changing the jumper, the protection device is suitable for the field DC power supply at 110VDC or 220VDC voltage level, CT at 1A or 5A current level.

Product Features

  • The operation box function available

  • The high-precision measurement for CT available

  • Built-in CFC programmable logic

  • Self-defined protection function provided

  • USB2.0 interface available

  • IEC61 850/IEC 1 03/Modbus protocol available

  • Redundant star network and ring network available

  • Constant value uploading and modification available

  • Convenient remote technical support services provided

Technical Parameters

No. Protection
Model
Function
Circuit Protection Motor Overcurrent Protection Motor Differential Protection Capacitor Protection (Unbalance Current) Capacitor Protection (Unbalance Voltage) Capacitor Protection (Differential Voltage)
Protection Category A B C D E F
1 Overcurrent Protection Three-sect Non-directional Overcurrent Protection · · · · · ·
Three-sect Directional Overcurrent Protection ·




LV Interlocking Function ·




Compound-voltage Interlocking Function ·




Three-sect Time Delay Outlet





One-sect IEC Non-directional Inverse-time Overcurrent Protection
· · · · · ·
One-sect IEC Directional Inverse-time Overcurrent Protection
·




2 Zero-sequence Overcurrent Protection
Three-sect Non-directional Zero- sequence Overcurrent Protection · · · · · ·
Three-sect Directional Zero-sequence Overcurrent Protection ·




One-sect IEC Non-directional Inverse-time Zero-sequence Overcurrent Protection
· · · · · ·
One-sect IEC Non-directional Inverse-time Zero-sequence Overcurrent Protection
·




Three-sect Time Delay Outlet





3 Negative Sequence Protection
Two-sect Constant Time-lag Negative Current Protection
· · ·


One-sect IEC Inverse-time Negative Current Protection
· · ·


4 Voltage Protection Two-sect Constant Time-lag Overvoltage Protection
· · · · · ·
Two-sect Constant Time-lag Undervoltage Protection
· · · · · ·
Three-phase Voltage; Three-phase No-voltage; Single-phase Voltage Monitoring
· · · · · ·
5 Accelerating Protection of Hand Closing Fault · · · · · ·
6 Four-sect Under-voltage Load Shedding · · ·


7 Four-sect Under-frequency Load Shedding · · ·


8 Zero-sequence Overcurrent Accelerating Protection ·




9 Phase-sequence Protection · · · · · ·
10 2nd Harmonic Interlocking Overcurrent Protection





11 Thermal Overload Protection
· ·


12 Under-current Protection
· ·


13 Motor Start-up Protection
· ·


14 Motor Stalling Protection
· ·


15 Motor Restart Inhibitory Protection
· ·


16 Reverse Power Protection · · ·


17 Differential Protection Electromagnetic Balance Differential Protection

·


Quick-break

·


Ratio Differential Protection

·


2nd &5th Harmonic Interlocking
Differential Protection






18 One-sect Constant Time-lag Unbalabced Overcurrent Protection


·

19 One-sect Constant Time-lag Unbalabced Overvoltage Protection



·
20 One-sect Constant Time-lag Differential Voltage Protection




·
21 One-sect Constant Time-lag Differential Current Protection





22 Two-sect Clearance Zero-sequence Overcurrent Protection





23 Two-sect Zero-sequence Overvoltage Protection






24 Over-excitation Protection





25 Overload Start Air Cooling





26 Overload Interlocking On-load Voltage Regulation





27 Two-sect Overload Protection · · ·


28 Three-sect Constant Time-lag One-sect Inverse-time Zero-sequence Overcurrent Protection on Low-voltage Side





29 20 Sets of User-defined Protection · · · · · ·
30 FC Circuit Overcurrent Interlocking Tripping Function · · ·


31 Charging Protection ·




32 Circuit Breaker Failure Protection · · · · · ·
33 Three-phase Inconsistent Protection





34 Synchronization Function (Same Frequency and Different Frequency Synchronization) ·




35 reclosing twice ·




36 Non-electricity Protection · · ·


37 4*(0-20mA) Analog Quantity Protection · · · · · ·
38 Small Current Line Selection · · · · · ·
39 Cooling Load Starting Signal · · · · · ·
40 Tripping and Closing Loop Monitoring · · · · · ·
Control Loop Disconnection Monitoring · · · · · ·
41 VT Disconnection Monitoring · · · · · ·
42 CT Disconnection Monitoring · · · · · ·


No. Protection
Model
Function
Capacitor Protection (Bridge Differential Current) Reactor Protection (Differential Protection) Transformer Bback-up Protection Substation Transformer Protection 2-4 Side Differential Protection Simplified Circuit Protection Simplified Motor Overcurrent
Protection Category G H J K L MA MB
1 Overcurrent Protection Three-sect Non-directional Overcurrent Protection · · · ·
· ·
Three-sect Directional Overcurrent Protection

·



LV Interlocking Function

· ·


Compound-voltage Interlocking Function

· ·
·
Three-sect Time Delay Outlet

·



One-sect IEC Non-directional Inverse-time Overcurrent Protection
· ·
·
· ·
One-sect IEC Directional Inverse-time Overcurrent Protection







2 Zero-sequence Overcurrent Protection
Three-sect Non-directional Zero- sequence Overcurrent Protection · · · ·
· ·
Three-sect Directional Zero-sequence Overcurrent Protection

·



One-sect IEC Non-directional Inverse-time Zero-sequence Overcurrent Protection
· ·
·
· ·
One-sect IEC Non-directional Inverse-time Zero-sequence Overcurrent Protection







Three-sect Time Delay Outlet

·



3 Negative Sequence Protection
Two-sect Constant Time-lag Negative Current Protection





· ·
One-sect IEC Inverse-time Negative Current Protection





· ·
4 Voltage Protection Two-sect Constant Time-lag Overvoltage Protection
·
· ·

·
Two-sect Constant Time-lag Undervoltage Protection
·
· ·

·
Three-phase Voltage; Three-phase No-voltage; Single-phase Voltage Monitoring
· · · ·
· ·
5 Accelerating Protection of Hand Closing Fault · · · ·
· ·
6 Four-sect Under-voltage Load Shedding


·
· ·
7 Four-sect Under-frequency Load Shedding


·
· ·
8 Zero-sequence Overcurrent Accelerating Protection




·
9 Phase-sequence Protection · · · ·
· ·
10 2nd Harmonic Interlocking Overcurrent Protection

·



11 Thermal Overload Protection





·
12 Under-current Protection





·
13 Motor Start-up Protection





·
14 Motor Stalling Protection





·
15 Motor Restart Inhibitory Protection





·
16 Reverse Power Protection






17 Differential Protection Electromagnetic Balance Differential Protection






Quick-break
·

·

Ratio Differential Protection
·

·

2nd &5th Harmonic Interlocking
Differential Protection




·

18 One-sect Constant Time-lag Unbalabced Overcurrent Protection






19 One-sect Constant Time-lag Unbalabced Overvoltage Protection






20 One-sect Constant Time-lag Differential Voltage Protection






21 One-sect Constant Time-lag Differential Current Protection ·





22 Two-sect Clearance Zero-sequence Overcurrent Protection

·



23 Two-sect Zero-sequence Overvoltage Protection


·



24 Over-excitation Protection

·



25 Overload Start Air Cooling

·



26 Overload Interlocking On-load Voltage Regulation

·



27 Two-sect Overload Protection

· ·
· ·
28 Three-sect Constant Time-lag One-sect Inverse-time Zero-sequence Overcurrent Protection on Low-voltage Side


·


29 20 Sets of User-defined Protection · · · ·


30 FC Circuit Overcurrent Interlocking Tripping Function






31 Charging Protection




·
32 Circuit Breaker Failure Protection · · · ·


33 Three-phase Inconsistent Protection

·



34 Synchronization Function (Same Frequency and Different Frequency Synchronization)






35 reclosing twice




·
36 Non-electricity Protection
· · ·
· ·
37 4*(0-20mA) Analog Quantity Protection · · · · ·

38 Small Current Line Selection · ·
·
· ·
39 Cooling Load Starting Signal · · · ·
· ·
40 Tripping and Closing Loop Monitoring · · · ·
· ·
Control Loop Disconnection Monitoring · · · ·
· ·
41 VT Disconnection Monitoring · · · ·
· ·
42 CT Disconnection Monitoring · · · · · · ·

Awards

Similar Product Recommend