Welcome Customer !

Membership

Shenzhen Wintop Optical Technology Co., Ltd,
Free Member ·1YRS
,
Other

Main Products: 光通信设备

Xwboo>Products

Shenzhen Wintop Optical Technology Co., Ltd,Free·1YRS

  • E-mail

    sales@wintoptec.com,shawn@wintoptec.com

  • Phone

    +8675586591151,+8675526641898

  • Address

    11F~12F, Senhainuo Kechuang Building,Shilong Community,Shiyan Street,Baoan District,Shenzhen

Contact Now

1000M Media converterMedia Converter

Model
1000M Media converter
Nature of the Manufacturer
Other
Product Category
Media Converter
Place of Origin
City, Province
Overview
1000M Media converter
Product Details

 Brief introduction

This product supports IEEE802.3z 1000Base-Tx/Fx protocol, as well as full duplex and half duplex mode.
This manual is for 1000M transceivers.

 

Installation
1. Interface
RJ-45 interface
The transmission media adopts CAT5 twisted-pair with typical length of 1000 meter.
It features the function of automatically identifying the through line and cross wire
Fiber interface
SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX.
When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber).
2. Connection
The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair.
And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver. Then switch on.
The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp)

 

Technical parameters:
1. Standard Protocol: IEEE 802.3z 1000Base-TX/FX standard
2.Connector:oneUTPRJ-45connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter:
outside: 5V DC 2A
built-in: 110-265V AC  48VDC
5. Environmental temperature: 0��?60 ��?lt;br /> 6. Relative humidity: 5%-90%
8. TP cable: Cat5 UTP cable
9. Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140μm
single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm

Label:   10/100/1000M Gigabit

 

Description

Fiber mode

TX power

Rx power

Wavelength

Distance

WT-8110GMA-11-05

Multi-mode dual fiber

-17~-12

<<-20.0

850nm

550m

WT-8110GMA-11-2

Multi-mode dual fiber

-17~-12

<<-20.0

1310nm

2 Km

WT-8110GSA-11-10

Single-mode dual fiber

-6~-12

<<-21.0

1310nm

10 Km

WT-8110GSA-11-20

Single-mode dual fiber

-3~-8

<<-23.0

1310nm

20 Km

WT-8110GSA-11-40

Single-mode dual fiber

-3~0

<<-25.0

1550nm

40 Km

WT-8110GSA-11-60

Single-mode dual fiber

 

 

1550nm

60 Km

WT-8110GSA-11-80

Single-mode dual fiber

>>1

<<-27.0

1550nm

80 Km

WT-8110GSB-11-10A/B

Single-mode single fiber

-10~-5

<<-20.0

A side:Tx1310nm/Rx1550nm 
B side:Tx1550nm/Rx1310nm

10 Km

WT-8110GSB-11-20A/B

Single-mode single fiber

-8~-3

<<-23.0

A side:Tx1310nm/Rx1550nm 
B side:Tx1550nm/Rx1310nm

20 Km

WT-8110GSB-11-40A/B

Single-mode single fiber

-3~-0

<<-23.0

A side:Tx1310nm/Rx1550nm 
B side:Tx1550nm/Rx1310nm

40Km

WT-8110GSB-11-60A/B

Single-mode single fiber

-3~-0

<<-23.0

A side:Tx1310nm/Rx1550nm 
B side:Tx1550nm/Rx1310nm

60Km

 
 

Similar Product Recommend