Welcome Customer !

Membership

Shenzhen Wintop Optical Technology Co., Ltd,
Free Member ·1YRS
,
Other

Main Products: 光通信设备

Xwboo>Products

Shenzhen Wintop Optical Technology Co., Ltd,Free·1YRS

  • E-mail

    sales@wintoptec.com,shawn@wintoptec.com

  • Phone

    +8675586591151,+8675526641898

  • Address

    11F~12F, Senhainuo Kechuang Building,Shilong Community,Shiyan Street,Baoan District,Shenzhen

Contact Now

1.25G CSFP Transceiver (WT-CSFP-135/53-20km)

Model
Nature of the Manufacturer
Other
Product Category
Optical transceiver
Place of Origin
City, Province
Overview
1.25G CSFP Transceiver (WT-CSFP-135/53-20km)
Product Details

  Features

l 1250Mbps Typical Data Rate and compliant to 1000Base BX20 IEEE802.3ah

l 1310nm FP laser transmitter for UCFP-135


1550nm DFB laser transmitter for UCFP-153

l PIN photo-detector

l Up to 20km on 9/125µm SMF

l Hot-pluggable CSFP footprint

l LC/UPC type pluggable optical interface

l Achieve operational compatibility with conventional SFP

l Metal enclosure, for lower EMI

l RoHS compliant and lead-free

l Single +3.3V power supply

l Support Digital Diagnostic Monitoring interface

l Compliant with SFF-8472

l Case operating temperature: Industrial / Commercial optional, 0°C to +70°C / -40°C to +85°C

 

 Applications

l Gigabit Ethernet(1000BASE-BX20)

l Point to Point FTTH Application

l Switched Backplane Applications

l Router/Server Interface

l Switch to Switch Interface 

  Description

The WT-CSFP-135/53 CSFP transceivers are compatible with the Compact Small Form- Factor Pluggable (CSFP) Multi-Source Agreement (MSA) option 2, The transceiver consists of 2-channel Bi-directional Optical Transceiver unit with five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1550nm DFB laser) and the PIN photo-detector .The module data link up to 20KM in 9/125um single mode fiber.

The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.

 

Conventional SFP will function when plugged into a C-SFP socket, at the same time no damage to C-SFP and host board if C-SFP module is plugged into a conventional SFP socket

 

   Mechanical Specifications (Unit: mm)

Label:   SFP

 Electrical Interface Characteristics

 

Parameter

Symbol

Min.

Typ.

Max.

Unit

Note

Transmitter

Total Supply Current

ICC

 

 

A

mA

Note (1)

Transmitter Disable Input-High

VDISH

2

 

Vcc+0.3

V

 

Transmitter Disable Input-Low

VDISL

0

 

0.8

V

 

Transmitter Fault Input-High

VTxFH

2

 

Vcc+0.3

V

 

Transmitter Fault Input-Low

VTxFL

0

 

0.8

V

 

Receiver

Total Supply Current

ICC

 

 

B

mA

Note (1)

LOSS Output Voltage-High

VLOSH

2

 

Vcc+0.3

V

LVTTL

LOSS Output Voltage-Low

VLOSL

0

 

0.8

V

 Note (1): A (TX) + B (RX) = 450mA    (Not include termination circuit) 

 

For detail, please check the datasheet in "Download".