Welcome Customer !

Membership

Shenzhen Singheng Optoelectronics Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: LED显示屏

Xwboo>Products

P10 single blue display

Model
Nature of the Manufacturer
Other
Product Category
LED single-color display
Place of Origin
City, Province
Overview
P10 single blue display
Product Details

P10 single blue display

Project

Technical parameter parameters

1、 Unit board

Communication interface: 12 interface

Physical point spacing: 10mm

Physical density: 10000 point /m2

Pixel tube origin: white, Guang Lei, Taiwan

Luminescence point color: 1W

Module size: 320mm x 160mm

The number of the ranks of the physical module: 32 (W) * 16 (H) point

Physical resolution: 512 point / module

2、Power supply

Working voltage: 220V + 10%

Average power consumption: 100 to 150W/m2

The maximum power consumption: less than 400W/m2

3、Control system

Synchronous asynchronous

4、The main technical parameters

Drive parts: the use of LED special drive parts

Drive mode: constant voltage drive

Scanning frequency:≥480 frames / seconds

Refresh rate:≥180frames / seconds

Gray / color: 256 level

Brightness:≥2500cd/m2

Luminance regulation mode:the software adjusts the 16 level adjustable

Average time free time:≥10000 hrs

Life:10ten thousand hrs

Flatness: between any adjacent pixels≤0.5mm;

Module splicing gap <1mm

Uniformity: the intensity of pixels and the uniformity of the module brightness

Switch power load:5V/40A

[color]

In general, the color of the text is red,and there are white, yellow, blue, green, purple and other colors. If the dualcolor module is used, the red, green and yellow color can be displayed at thesame time.

[way]

LED monochrome screen to take the word,display forms, text scrolling, entry and exit to the left and right shift, evenstart down even shift, from small to big, from big to small, horizontal blinds,vertical blinds, downward and upward expansion expansion, fade, closed, mosaicon the left and right closed etc. dozens of special effects.

[control mode]

The control mode of LED monochromaticdisplay is generally divided into three forms:

1.U disk, in the computer software editinggood content after the introduction of the U disk, and then insert the U diskto the display USB port.

2. wired: network line, serial line, fiberand other forms, edit a good program on the computer and send it to the displayscreen through the above lines

3. wireless: GSM, GPRS, WIFI and otherforms. By adding the corresponding function modules on the display controller,the wireless control mode can be realized.



Similar Product Recommend