LPTL filter cartridges are characterized by hydrophilic PTFE membrane and polypropylene components for broad applications, widely used in Active Pharmaceutical Ingredients production in a variety of solvent filtration.Features and Benefits● Broad chemical compatibility● No need of pre-wetting● 99% integrity testable prior to releaseQuality● Cartridges produced in a controlled environment● Manufactured according to ISO9001 certified Quality Management System
LPTL filter cartridges are characterized by hydrophilic PTFE membrane and polypropylene components for broad applications, widely used in Active Pharmaceutical Ingredients production in a variety of solvent filtration.Features and Benefits● Broad chemical compatibility● No need of pre-wetting● 99% integrity testable prior to releaseQuality● Cartridges produced in a controlled environment● Manufactured according to ISO9001 certified Quality Management System
Specification
LPTL Filter Cartridge for Active Pharmaceutical Ingredients
Materials of Construction |
Membrane | Hydrophilic Polytetrafluoroethylene (PTFE) |
Support | PP |
Core, Cage and Drainage | PP |
End Caps | PP (222/226 with encapsulated stainless steel reinforcing ring) |
O-rings/Gasket | EPDM/FKM/E-FKM/Silicone |
Sealing Technology | Thermal Bonding, No Adhesives |
Dimensions |
Diameter | Φ68 |
Length | 5 inch, 10 inch, 20 inch, 30 inch, 40 inch |
Filtration Area, ft2 |
≥ 5.8 per 10-inch element |
Pore Size, μm |
0.1, 0.22, 0.45, 1.0 |
Maximum Differential Pressure |
Forward: 4.2 bar @ 23 ℃; 1.5 bar @ 85 ℃ |
Integrity Test-60/40% IPA/water bubble point at 23 ℃ |
0.1 μm | ≥ 1100 mbar |
0.22 μm | ≥ 900 mbar |
Bacterial Retention (for 0.1 and 0.22 μm only) |
Passed the bacterial challenge testing using Brevundimonas diminuta(ATCC19146) at a minimum challenge concentration of 1 x 107 CFU/cm2. |
Extractables, per 10-inch cartridge |
≤ 50 mg after 24-h soak in water |
Effluent Particle Level |
Meets the requirements of Chinese Pharmacopoeia 2010, Volume Ⅱ, appendix Ⅸ C. |
Non-Fiber Releasing |
Meets the criteria for a “non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
Toxicity |
Component materials meet GB/T 14233.2<2005>of Chinese National Standard for Safety Tests. |
TOC |
< 500 ppb after a water flush of 60 liters per 10-inch cartridge |
Multiple Sterilization Cycles |
15 steam-in-place sterilization or autoclave cycles of 30 min at 123℃ |
Oxidizable Substances |
Meets the criteria of Chinese Pharmacopoeia 2010, volume Ⅱ for purified water. |
Bacterial Endotoxins |
< 0.25 EU/ml as determined by the LAL test |