Frequency stability Power Supply
Introduction
The CVCF power is mainly applied to some remote areas or generator power supply voltage and frequency fluctuations, leading to load equipment can not work normally, and designed & developed. It can make the power of bad power voltage, frequency stabilization treatment, the output of high quality and high reliable CVCF power , and avoid load equipment hazards for the voltage frequency fluctuations large, waveform distortion. It use hill card CVCF power electric equipment is safe and reliable operation of the best protection. Performance characteristics: 1, wide the input voltage and frequency range 2, the output waveform is pure sine wave 3, The specifically design for North Korea grid environment 4, applicable to various types of loading 5, the larger range of choice , capacity 1KVA-2000KVA 6, stable performance, the core components used of the original Japanese import Notes 1) Custom-made specifications are available 2) The website specifications are only for your reference, the actual specificities depends on attached specifications. |
Technical Index
Circuit Type | (IGBT)MPWM (Pulse Width Modulation) |
Output Capacity | 1KVA-20KVA | 10KVA -2000KVA |
Input(AC) | Single-phase:AC140V-260V (Custom-made specifications are available) | Phase:Three-phase four-wire |
Voltage:AC 265V - 495V (Custom-made specifications are available) |
Frequency:30 - 70HZ (Custom-made specifications are available) | Frequency:30 - 70HZ (Custom-made specifications are available)AC |
Output(AC) | Voltage:Single-phase AC220V | Voltage:AC380VThree-phase four-wire/Single-phase AC220V |
Frequency:50HZ/60HZ Adjustable | Frequency:50HZ/60HZ Adjustable |
Frequency Stability | ≤±0.1% |
Load Regulation | ≤1% |
Waveform Distortion Rate | ≤2% |
Output Instruments | Frequency Indicator,Voltage Meter,Ampere Meter,Power Indicator/Power Factor Meter |
Efficiency | ≥85% |
Protective Devices | Over load, short circuit, over voltage, over current, over temperature protective and alarm devices. |
Operating Environment | Temperature 0~40℃ Relative Humidity 0~90% |
Method for Selecting Power Capacity
1. Resistance: Power Capacity = 1.1× Load Power
Load Starting Current
2. Induction: Power Capacity = ──────────────────── × Load Power
Load Rated Current
Wave Crest Coefficient for Load Current
3. Rectification: Power Capacity = ──────────────────────────────── × Load Power
1.5
4. Mixed: Please properly select according to the percentage of different loads.
Note: For such inductive loads as refrigerator and air conditioning, the power capacity should be selected according to the starting power.