Key Benifits and FeaturesSupport TR069,NAT,DMZ,DNS featuresSupport Multiple ssidSupport Multiple VLANSupport IPV6 ,PPPoE, DHCP and Static IP configuration for WAN InterfaceSupport IP, MAC filtering, Firewall Functionality in routed mode
RicherLink RL801EW Router Overview
RL801EW terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators or cable operators. The box is based on the mature EPON technology, which have high ratio of performance to price, and the technology of 802.11 n WiFi (2T2R), Layer 2/3. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And It is fully compliant with technical regulations such as IEEE802.3ah and technical requirement of EPON Equipment (V2.1 and above version) from China Telecom.
Figure 1: RicherLink RL801EW Router

Description RL801EW equipment Interface
| Port Type | Function |
| PON port | Connect PON port with internet by SC type, single mode optical fiber cable |
| LAN 1 port | RJ45 Port connects to local internet, 1 GE port automatically |
| Reset button (RST) | Press down reset button and keep 5 seconds to make the device restart and recover from the factory default Settings. |
| PWR (DC12 V) | Connect with power adapter |
| Power turn on/off | Power turn on/off |
RL801EW LED statement
| Indicators | status | Description |
| POWER | Light on | ONU power supply normally |
| Light off | ONU no power supply |
| PON | Light on | ONU link active |
| Blink | ONU manage to link |
| Light off | ONU receiving power rate lower than optical receiver sensitivity |
| LOS | Blink | Device does not receive optical signals. |
| Light off | Device has receivedoptical signal. |
| WIFI | Light on | WiFi turn on |
| Light off | Device is power off or WiFi turn off |
| Blink | WiFi turn on and with ongoing data transmission |
| INTERNET | Light on | Internet is effective. |
| Light off | Internet is ineffective. |
| LAN | Light on | network port linked, but no data transmitting |
| Blink | network port data pass |
| Light off | ONU no power supply or internet cable unlink |
RL801EW specification and working environment
| Parameter | Nominal |
| Dimension | 180mm×115mm×30mm(L×W×H) |
| Net weight | 0.2kg |
| Typical power consumption | <5W |
| Noise | None |
| Cooling style | Naturally cooling |
| Power supply | 12V DC(By external AC/DC adapter) |
| Installation style | Support PC, wall mount or put inside of information box. |
| Environment | -5~50℃ |
| Atmospheric pressure | 70~106Kpa |
| MTBF | 50,000hours |
| MTTR | 30minutes |
| Parameter | Nominal |
RL801EW EPON Interface
| Parameter | Nominal |
| Connector style | SC/PC |
| PON quantity | 1 |
| Fiber style | Single mode |
| Wavelength | TX:1310 +/-20nm RX:1490 +/-10nm |
| PON interface standard | IEEE802.3-BASE-PX20+ |
| PON interface receiving rate | 1.244Gpbs |
| PON interface transmitting rate | 1.244Gpbs |
| Output optical power | Min: 0dBm Max: +4dBm |
| Opticalreceiver sensitivity | Precede -28dBm |
| The length of the optical link | Max 20km |
RL801EW WIFI Specifications
| Standard | IEEE 802.11 b/g/n |
| WiFiparameter | Frequency | 2.4~2.4835GHz |
| Transmission speed | 2.4GHz Frequency: IEEE 802.11b :11/5.5/2/1M(Auto) IEEE 802.11g:54/48/36/24/18/12/9/6(Auto) IEEE 802.11n:270/243/216/162/108/81/54/27Mbps,up to 300Mbps |
| Channel number | 2.4GHz :13 |
| Spread-spectrum Technique | DSSS(Direct sequence spread spectrum) |
| Data Modulation | DBPSK、DQPSK、CCK and OFDM(BPSK/QPSK/16-QAM/64-QAM) |
| Sensitivity@PER(Package error rate) | 270M:-68dBm@10% PER;130M: -68dBm@10% PER;108M:-68dBm@10% PER;54M:-68dBm@10% PER 11M:-85dBm@8% PER;6M:-88dBm@10% PER 1M:-90dBm@8% PER; |
| Transmission distance | Indoor Maximum 120 meters;Outdoor Maximum 360 meters(The distance depends on the environment) |
| RF power | 20dBm EIRP |
| Antenna | 5dBi Antennas |