Key Benifits and FeaturesSupport TR069,NAT,DMZ,DNS features Support Multiple ssid Support Multiple VLAN Support IPV6 ,PPPoE, DHCP and Static IP configuration for WAN Interface Support IP, MAC filtering, Firewall Functionality in routed mode
RicherLink RL801GW Router Overview
RL801GW terminal devices are designed for fulfilling FTTH and triple play service demand of Internet network operators or cable operators. The box is based on the mature PON technology, which have high ratio of performance to price, It support XPON features which can connect with GPON OLT or EPON OLT. and it support 802.11 n WiFi(2T2R) , Layer 2/3.It is highly reliable and easy to maintain, with guaranteed QoS for different service. And It is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.11ah.
Figure 1: RicherLink RL801GW Router

Description RL801GW equipment Interface
| Port Type | Function |
| PON port | Connect PON port with internet by SC type, single mode optical fiber cable |
| LAN 1 port | RJ45Port connects to local internet, 1 GE port automatically |
| Reset button (RST) | Press down reset button and keep 1-5 seconds to make the device restart and recover from the factory default Settings. |
| PWR port (DC12 V) | Connect with power adapter |
| Power turn on/off | Power turn on/off |
RL801GW LED statement
| Indicators | status | Description |
| POWER | Light on | ONU power supply normally |
| Light off | ONU no power supply |
| PON | Light on | ONU link active |
| Flash | ONU manage to link |
| Light off | ONU receiving power rate lower than optical receiver sensitivity |
| LOS | Blink | Device does not receive optical signals. |
| off | Device has receivedoptical signal. |
| WIFI | on | WiFi turn on |
| off | Device is power off or WiFi turn off |
| Blink | WiFi turn on and with ongoing data transmission |
| INTERNET | on | Internet is effective. |
| off | Internet is ineffective. |
| ETH1 | Light on | network port linked, but no data transmitting |
| Flash | network port data pass |
| Light off | ONU no power supply or internet cable unlink |
RL801GW specification and working environment
| Parameter | Nominal |
| Dimension | 180mm×148mm×31mm(L×W×H) |
| Net weight | 0.26kg |
| Typical power consumption | <7W |
| Noise | None |
| Cooling style | Naturally cooling |
| Power supply | 12V DC(By external AC/DC adapter) |
| Installation style | Support PC, wall mount or put inside of information box. |
| Environment | 0~45℃ |
| Atmospheric pressure | 70~106Kpa |
| MTBF | 50,000hours |
| MTTR | 30minutes |
| Parameter | Nominal |
RL801GW GPON Interface
| Parameter | Nominal |
| Connector style | SC/PC |
| PON quantity | 1 |
| Fiber style | Single mode |
| Wavelength | TX:1310 +/-20nm RX:1490 +/-10nm |
| PON interface standard | ITU-T G.984.2/ITU-T G.984.3/ITU-TG.988 Class B+ |
| PON interface receiving rate | 1.244Gpbs |
| PON interface transmitting rate | 2.488Gpbs |
| Output optical power | Min: 0dBm Max: +5dBm |
| Opticalreceiver sensitivity | Precede -28dBm |
| The length of the optical link | Max 20km |
RL801GW WIFI Specifications
| Standard | IEEE 802.11 b/g/n |
| WiFiparameter | Frequency | 2.4~2.4835GHz |
| Transmission speed | 2.4GHz Frequency: IEEE 802.11b :11/5.5/2/1M(Auto) IEEE 802.11g:54/48/36/24/18/12/9/6(Auto) IEEE 802.11n:270/243/216/162/108/81/54/27Mbps,up to300Mbps |
| Channel number | 2.4GHz :13 |
| Spread-spectrum Technique | DSSS(Direct sequence spread spectrum) |
| Data Modulation | DBPSK、DQPSK、CCK andOFDM(BPSK/QPSK/16-QAM/64-QAM) |
| Sensitivity@PER(Package error rate) | 270M:-68dBm@10% PER;130M: -68dBm@10% PER; 108M:-68dBm@10% PER;54M:-68dBm@10% PER 11M:-85dBm@8% PER;6M:-88dBm@10% PER 1M:-90dBm@8% PER; |
| Transmission distance | Indoor Maximum 120 meters;Outdoor Maximum 360 meters(The distance depends on the environment) |
| RF power | 20dBm EIRP |
| Antenna | 5dBi Antennas |