Key Benifits and FeaturesSupportTR069,NAT,DMZ,DNS featuresSupport Multiple ssidSupport Multiple VLANSupport IPV6 ,PPPoE, DHCP and Static IP configuration for WAN InterfaceSupport IP, MAC filtering,Firewall Functionality in routed mode
RicherLink RL804GCW Router Overview
RL804GCW is GPON ONU terminal devices designed for fulfilling FTTx and triple play service demand of fixed network operator or cable operators. This box is based on the stable and mature Gigabit GPON technology, which has high ratio of performance to price, and the technology of Layer 2 Ethernet switch,11N WiFi,CATV, WDM and high quality VoIP as well. It is highly reliable and easy to maintain, with guaranteed QoS for different service. And It is fully compliant with technical regulations such as ITU-T G.984.x and technical requirement of GPON Equipment from China Telecom.
Figure 1: RicherLink RL804GCW Router

Description RL804GCW equipment Interface
| Port Type | Function |
| RF | CATV RF output port, connect a TV or set-top box via this interface. |
| CATV | Support SC / APC optical pigtail connector forCATV access networks PON + CATV three wavelength signals. |
| LAN1-4 port | RJ45 Port connects to local internet,1 GE port and 3 FE port |
| Reset button (RST) | Press down reset button and keep 5 seconds to make the device restart and recover from the factory default Settings. |
| PWR port (DC12 V) | Connect with power adapter |
| Power turn on/off | Power turn on/off |
RL804GCW LED statement
| Indicators | status | Description |
| POWER | Light on | ONU power supply normally |
| Light off | ONU no power supply |
| RF | Light on | CATV optical receiver output level normal |
| Blink | CATV optical receiver output level lower than normal or failure |
| CATV | Light off | CATV optical receiver signal normal |
| Blink | CATV optical signal power rate over normal or less than normal status |
| PON | Light on | ONU link active |
| Blink | ONU manage to link |
| Light off | ONU receiving power rate lower than optical receiver sensitivity |
| LOS | Blink | Device does not receive optical signals. |
| Light off | Device has receivedoptical signal. |
| WIFI | Light on | WiFi turn on |
| Light off | Device is power off or WiFi turn off |
| Blink | WiFi turn on and with ongoing data transmission |
| LAN1-4 | Light on | network port linked, but no data transmitting |
| Blink | network port data pass |
| Light off | ONU no power supply or internet cable unlink |
| SYS | Green | PON module power supply |
| Orange | System start normally |
RL804GCW specification and working environment
| Parameter | Nominal |
| Dimension | 180mm×148mm×30mm(L×W×H) |
| Net weight | 0.3kg |
| Typical power consumption | <9W |
| Noise | None |
| Cooling style | Naturally cooling |
| Power supply | 12V DC(By external AC/DC adapter) |
| Installation style | Support PC, wall mount or put inside of information box. |
| Environment | -5~50℃ |
| Atmospheric pressure | 70~106Kpa |
| MTBF | 50,000hours |
| MTTR | 30minutes |
RL804GCW GPON Interface
| Parameter | Nominal |
| Connector style | SC/APC |
| PON quantity | 1 |
| Fiber style | Single mode |
| Wavelength | TX:1310 +/-20nmRX:1490 +/-10nm |
| PON interface standard | ITU-T G.984.2/ITU-T G.984.3/ITU-TG.988 Class B+ |
| PON interface receiving rate | 2.488Gpbs |
| PON interface transmitting rate | 1.244Gpbs |
| Output optical power | Min: 0.5dBm Max: +5dBm |
| Opticalreceiver sensitivity | Precede -29dBm |
| The length of the optical link | Max 20km |
RL804GCW CATV Optical receiver parameter
| Item | Unit | Parameter |
| Optical parameter | Receivingoptical wavelength | nm | 1200~1650 |
| Receiving optical power | dBm | -18~+2 |
| Reflection loss | dB | ≥50 |
| Connector | – | SC/APC |
| Fiber type | – | Single mode |
| Isolation (WDM) | Forward channel | dB | ≥40 |
| Reflection channel | dB | ≥22 |
| RF parameter | Frequency | MHz | 45 ~ 1000 |
| In-band flatness | dB | ±1 |
| Output reflection loss | dB | ≥14 |
| Nominal output level | dBuV | =76±1 (AGC range:-12~ -2dBm) |
| Attenuation range | dB | -18—0 |
| C/N | dB | ≥ 46 |
| C/CTB | dB | ≥ 65 |
| C/CSO | dB | ≥ 65 |
| Output impedance | Ω | 75 |
| Others | Power supply(DC) | V | 12 |
| Power consumption | W | ≤1.5 |
| Working temperatureStorage temperature | ℃℃ | 0 ~ +45 |
| -40~ +75 |
| Relative humidity | % | Maximum 95% non-condensing |
RL804GCW WIFI Specifications
| Standard | IEEE 802.11 b/g/n |
| WiFiparameter | Frequency | 2.4~2.4835GHz |
| Transmission speed | 2.4GHz Frequency: IEEE 802.11b :11/5.5/2/1M(Auto) IEEE 802.11g:54/48/36/24/18/12/9/6(Auto) IEEE 802.11n:270/243/216/162/108/81/54/27Mbps,up to 300Mbps |
| Channel number | 2.4GHz :13 |
| Spread-spectrum Technique | DSSS(Direct sequence spread spectrum) |
| Data Modulation | DBPSK、DQPSK、CCK and OFDM(BPSK/QPSK/16-QAM/64-QAM) |
| Sensitivity@PER(Package error rate) | 270M:-68dBm@10% PER;130M: -68dBm@10% PER;108M:-68dBm@10% PER;54M:-68dBm@10% PER 11M:-85dBm@8% PER;6M:-88dBm@10% PER 1M:-90dBm@8% PER; |
| Transmission distance | Indoor Maximum 120 meters;Outdoor Maximum 360 meters(The distance depends on the environment) |
| RF power | 20dBm EIRP |
| Antenna | 5dBi Antennas |