Key Benifits and FeaturesSupport TR069,NAT,DMZ,DNS featuresSupport Multiple VLANSupport CAS,L2oGRESupport IPV6 ,PPPoE, DHCP and Static IP configuration for WAN InterfaceSupport IP, MAC filtering, Firewall Functionality in routed modeSupport for XPON, adaptive EPON or GPON OLT on the network
RicherLink RL804GS Router Overview
RL804GS terminal equipment is designed to meet the needs of FTTH / FTTO and triple play services of fixed network operators or cable operators. It adopts mature Gigabit GPON technology and provides 4 GE ports. It has the characteristics of high reliability, QoS guarantee, manageability, flexible expansion and networking. It has high cost performance and is the leading MDU ONU equipment in the industry. Fully comply with ITU-TG.984. X and other technical specifications and technical requirements of China Telecom GPON equipment (v2.1 and above).
Figure 1: RicherLink RL804GS Router

Description RL804GS equipment Interface
| Port Type | Function |
| PON | Connect PON port with internet by SC type, single mode optical fiber cable |
| LAN | RJ45 Port connects to local internet, 4 GE port automatically |
| RESET | Press down reset button and keep 5 seconds to make the device restart and recover from the factory default Settings. |
| POWER (DC 12V) | Connect with power adapter |
| ON/OFF | Power turn on/off |
Indicators of device
| Indicators | status | Description |
| PWR | Light on | ONU power supply normally |
| Light off | ONU no power supply |
| PON | Light on | ONU gateway registered |
| Blink | ONU manage to link |
| Light off | ONU not registered |
| LOS | Blink | Received optical power is lower than the sensitivity of the optical receiver. |
| Light off | Received optical power is normal |
| LAN 1 | Light on | network port linked, but no data transmitting |
| Blink | network port data pass |
| Light off | ONU no power supply or internet cable unlink |
| LAN2 | Light on | network port linked, but no data transmitting |
| Blink | network port data pass |
| Light off | ONU no power supply or internet cable unlink |
| LAN3 | Light on | network port linked, but no data transmitting |
| Blink | network port data pass |
| Light off | ONU no power supply or internet cable unlink |
| LAN4 | Light on | network port linked, but no data transmitting |
| Blink | network port data pass |
| Light off | ONU no power supply or internet cable unlink |
specification and working environment
| Parameter | Nominal |
| Dimension | 175mm×125mm×31mm(L×W×H) |
| Net weight | 0.4kg |
| Typical power consumption | <5W |
| Noise | None |
| Cooling style | Naturally cooling |
| Power supply | 12V DC(By external AC/DC adapter) |
| Installation style | Support PC, wall mount or put inside of information box. |
| Environment | -5~50℃ |
| Atmospheric pressure | 70~106Kpa |
| MTBF | 50,000hours |
| MTTR | 30minutes |
| Parameter | Nominal |
Interface Specifications
| Parameter | Nominal |
| Connector style | SC/PC |
| PON quantity | 1 |
| Fiber style | Single mode |
| Wavelength | TX:1310 +/-20nmRX:1490 +/-10nm |
| PON interface standard | ITU-T G.984.2/ITU-T G.984.3/ITU-TG.988 Class B+ |
| PON interface receiving rate | 2.488Gpbs |
| PON interface transmitting rate | 1.244Gpbs |
| Output optical power | Min: 0.5dBm Max: +5dBm |
| Opticalreceiver sensitivity | Precede -29dBm |
| The length of the optical link | Max 20km |