Reactor
The reactor is a stainless steel container for physical or chemical reaction. The configuration of the container is based on different process conditions. The design conditions, processes, inspection and manufacturing, and acceptance must be based on relevant technical standards to achieve the heating, evaporation, cooling and low requirements of the process High-speed mixing reaction function. Suitable for petroleum, chemical, pharmaceutical, metallurgy, scientific research, colleges and universities to carry out high temperature and high pressure chemical reaction tests, used to complete hydrolysis, neutralization, crystallization, distillation, evaporation, storage, hydrogenation, hydrocarbonation, polymerization, condensation , Heating and mixing, constant temperature reaction and other processes, can achieve high stirring effect on viscous and granular materials.
Dissolution tank
The dissolving tank is an indispensable dissolving equipment in the production of food, pharmaceutical and chemical industries. It has a wide range of uses and can be applied to solid dissolution or liquid mixed dissolution. The dissolution tanks are all made of stainless steel SUS304 or 316L, with good corrosion resistance.
The dissolving tank structure adopts jacket design. The jacket structure can be divided into standard jacket, outer coil jacket, and rice honeycomb honeycomb. The inner surface is polished with electrolytic mirror surface, without hygienic dead angle, and the fully enclosed design ensures that the material is always in a sterile state. The heads (cones) are all processed by spinning to comply with GMP standards.
Technical Parameters
Nominal volume | 100L | 300L | 500L | 1000L | 2000L | 3000L | 5000L | 10000L |
Inner diameter size(mm) | 500 | 800 | 900 | 1100 | 1400 | 1500 | 1800 | 2100 |
Heat exchange area (m2) | 0.9 | 2.0 | 2.7 | 4.5 | 7.5 | 10.0 | 13.5 | 22 |
Stirring power (KW) | 0.55 | 0.75 | 1.5 | 3.0 | 4.0 | 5.5 | 7.5 | 11.0 |
Speed (r / m) | Fixed speed or frequency control |
Stirring form | Design and manufacture according to material properties |
Working pressure (Mpa) | Design and manufacture according to technological conditions |
Working temperature ℃ | 0-142° |
Jacket heating / cooling medium | Steam / cooling water |
Applicable PH | 2-12 |
Insulation Materials | Polyurethane |
Nozzle configuration | Can be designed as needed under the conditions |
Tank material | SUS304/316L or other anti-corrosion stainless steel materials |
Container categories | Atmospheric pressure / Class I |