Welcome Customer !

Membership

Shenzhen Lucsun Security Technology Co.,Ltd.
Free Member ·1YRS
,
Other

Main Products: 报警器

Xwboo>Products

Shenzhen Lucsun Security Technology Co.,Ltd.Free·1YRS

  • E-mail

    sales@lucsun.net

  • Phone

    +86-755-89479786

  • Address

    4th floor 63 building , zhongwu new industrial park, xixiang, baoan district, shenzhen   

Contact Now

Chassis alarm

Model
Nature of the Manufacturer
Other
Product Category
Mini alarm
Place of Origin
City, Province
Overview
Chassis alarm
Product Details
Installation Instructions:
 


 

Anti-theft alarm appearance as shown on the left side line of the alarm switch and alarm
1, first in the bottom of the computer chassis (also available in the rear cover, or other location) to select an appropriate location fixed alarm, the alarm of the alarm switch protruding outside the framework of the chassis to ensure the sad case of plywood together After switching on the alarm being squeezed and disconnect the power. Once the side discharge opening and the alarm reset switch, power on and alarm.
2, the alarm back has double sided tape, the first open alarm protective layer can be attached to the chassis of the computer chassis can also be metal screws in the base plate. Fixed alarm after the alarm switch must be free to extend its framework, its telescopic stroke should not be any obstacles. If high enough, can elevate the alarm or curved side of the frame to open a file to install the gap.
3, frequent memory loss for the case of Internet cafes to increase the memory to the alarm button switch mounted on the memory card slot, memory, press and hold switch when installed into the alarm system into standby mode, the memory of release or is unplugged, pop into the push button switch alarm.
3, the switch can access the alarm line of the important parts to be protected enclosure (such as hard shell), or take sides.
4, by-pass power switch (at entry pass, according to exit) alarm work.
Use recommended
1, if the computer without the long-term (or repair, or to be upgraded) it is best to power off alarm.
 
1, Input voltage: DC 4.5V
2, working voltage: DC4.5V
3, static current: 3Ma
4, the alarm sound level:> 100dB
Similar Product Recommend