310 Anti-lost alarm white
Anti-losing phone anti-theft forget ● wallet & luggage
●Anti-lost children & pets
The time of purchase, please read these instructions carefully and follow the operating instructions to use a new battery, maintenance and other reference below.
(1) Battery Load Transmitter
① unscrew the back of the two fixed screws, remove the back cover
② the circuit board inside the battery taken out
③ ⊕ surface (smooth surface) up into the battery holder.
④ cell battery holder on the side close to the wall of the battery and battery holder completely overlap, the circuit board into the enclosure. ○
① part of the thumb according to the receiver a little harder to push back the arrival
② battery anode side of the spring tight, 1.5V batteries into the battery compartment cover
③ Replace the battery cover
(2) Battery testing
Transmitter
Will switch to ON, the red lights flashing. When the light was dim light, the lack of electricity can be determined, must replace the battery.
Receiver
Allocated to the S-ON state when the receiver is looking for, the receiver receives the transmitted signal, the lights flashing, light sound, motor vibration significantly.
As the case load that the battery can be anti-lost alarm to work properly.
(3) Replacement battery description
(Regularly check the working condition of the product is normal, if insufficient electricity)
Proposed to replace the battery: 3V CR2032 receiver transmitter with 1.5V AAA SIZE
① transmitter signal or no signal is sent very dark →
② receiver transmitter to replace the battery alarm weak, unstable from the receiver to replace the battery
③ → released to the defense lost the receiver ON, dim red lights is weak, flashing is not obvious → receiver to replace the battery
(4) Notes
① aviation aircraft, please stop using it.
② After prolonged use, you can remove the battery in a cool dry fine battery life.
③ radio waves transmitted from the product is generally 1mW, not cause any harm. Use of sound or vibration alarm when prompted, please note that the product signal prompted not be confused with other sounds, so as to avoid losses.
④ attention to water.
⑤ transmitter in the protected object must features a good body, so as to avoid separation of the protected object, can not guarantee the security of the protected object set distance.
⑥ The product uses a wide range, but children under 3 years of age must be under the supervision of parents to use.
⑦ throw the product away from high places, and other hard objects, collision and other non-factory quality problems, failure in not covered under warranty.
(5) Product Description
Transmitter
Form Factor: 44 (H) × 28 (W) × 8 (D) mm
Weight: 9.3g
Receiver
Form Factor: 60 (H) × 36 (W) × 15 (D) mm
Weight:35.5g
Battery: 7 cell × 1
Scope of 0 ~ 25M (usually refers to no particular around the time of wireless barriers for distance) receiver battery life: 1 day 8 hours, 32 times per minute, about 2 months prompted the transmitter: 1 day 8 hours about 3 weeks total weight of about 65.8g Packing 200 (H) × 80 (W) × 17 (D) mm ※ with batteries, test instructions and replacement instructions Note: Wireless barriers to contain the metal walls of the building, the tram body, The object of radio wave propagation, set the distance so long or short interference changes. Please use the environment and set the appropriate safe distance from the object. Suggest a feature search functions to the S-ON power dial set when the search function of transmitting signals within the receiver, the receiver receives the signal, the receiver issued a "dee dee dee dee" alarm tone sounds and nearly vibration (vibration with the product) and easy to find the protected object; if the scope of emission signals at the receiver, the receiver lights straight on, not to issue a warning tone. To promote the control wheel can be set down from
Use
:
1, anti-lost function: the receiver to receive control wheel dial to the maximum distance, the power switch to: "Anti-lost N-ON", issued a "tick" sound start tone, then the receiver issue: "tick ... tick ... "wait to learn the tone, then the net transmitter power switch to ON, the transmitter signal light flashing, start sending signals, the receiver receives the signal issued after puberty machine:" Didi "Two tone of success in learning and lights flash, learning the code successfully. Note: If the receiver power (in this case the transmitter is turned off), made "Didi" Two tone of success in learning, please check whether there are other transmitters in the work. If after turning on the transmitter, receiver, or issue: "tick ... tick ..." wait to learn the tone that has not yet learned the transmitter signal. Please check the control wheel position is appropriated the right direction, whether the transmitter is working properly.
2, after the success of learning the code, you can drive from the control wheel, set the corresponding object is a proper distance protection, we recommend bags, wallets and other items normally located in a distance of about 3 meters, a child or pet animals is relatively far away, please customized according to the situation.
3, when an object is to leave the set distance protection, the receiver alarm (sound alarm sound products, tips, there is vibration and vibration alarm indication tone prompt.)
4, to find function: to pay the receiver power switch to "look for S-ON" at this time the receiver issued a "Didi" of waiting to learn the tone, when receiving the transmission signal, the receiver issued a "dee dee dee dee " sound was a tone and vibration (vibration with the product), easy to find the protected object, such as to leave the reception range, receiver lights straight on, not to issue a warning tone.
5, the transmitter features a protective object in the body, the receiver who wear myself or my master.