Welcome Customer !

Membership

Shenzhen Lucsun Security Technology Co.,Ltd.
Free Member ·1YRS
,
Other

Main Products: 报警器

Xwboo>Products

Shenzhen Lucsun Security Technology Co.,Ltd.Free·1YRS

  • E-mail

    sales@lucsun.net

  • Phone

    +86-755-89479786

  • Address

    4th floor 63 building , zhongwu new industrial park, xixiang, baoan district, shenzhen   

Contact Now

Two-way Anti-lost alarm function

Model
Nature of the Manufacturer
Other
Product Category
Anti-lost alarm
Place of Origin
City, Province
Overview
Two-way Anti-lost alarm function
Product Details
Will switch to ON, the red lights flashing. When the light was dim light, the lack of electricity can be determined, must replace the battery. Allocated to the S-ON receiver when the receiver is looking for the state, the receiver receives the transmitted signal, the lights flashing, light sound, motor vibration significantly. As the case load that the battery can be anti-lost alarm to work properly.
(3) the replacement of the battery that (periodically check the working condition of the product is normal, if low battery, etc.) proposed to replace the battery: 3V CR2032 transmitter receiver transmitter with 1.5V AAA SIZE
① very dark signal or no signal transmitter to send → To replace the battery alarm
② weak receiver from the receiver to replace the battery unstable →
③ allocated to the defense lost the receiver ON, weak red lights dim, blinking obvious → receiver to replace the battery (4) Note
① in Aircraft and space, please stop using it.
② After prolonged use, you can remove the battery in a cool dry fine battery life.
③ radio waves transmitted from the product is generally 1mW, not cause any harm. Use of sound or vibration alarm when prompted, please note that the product signal prompted not be confused with other sounds, so as to avoid losses. ④ attention to water.
⑤ transmitter in the protected object must features a good body, so as to avoid separation of the protected object, can not guarantee the security of the protected object set distance.
⑥ The product uses a wide range, but children under 3 years of age must be under the supervision of parents to use.
⑦ throw the product away from high places, and other hard objects, collision and other non-factory quality problems, failure in not covered under warranty. (5) Product Description transmitter Form Factor: 44 (H) × 28 (W) × 8 (D) mm Weight: 9.3g receiver Form Factor: 60 (H) × 36 (W) × 15 (D) mm Weight : 35.5g Battery: 7 cell × 1 scope 0 ~ 25M (usually refers to no particular around the time of wireless barriers for distance) receiver battery life: 1 day 8 hours use, 32 times per minute, about 2 Tips month or so transmitters: 1 day 8 hours with about 3 weeks total weight of about 65.8g Packing 200 (H) × 80 (W) × 17 (D) mm ※ with batteries, test instructions and replacement instructions Note: Wireless barriers contains the metal wall buildings, tram body, there are radio waves transmitted by the object, set the distance so long or short interference changes. Please use the environment and set the appropriate safe distance from the object. Suggest a feature search functions to the S-ON power dial set when the search function of transmitting signals within the receiver, the receiver receives the signal, the receiver issued a "dee dee dee dee" alarm tone sounds and nearly vibration (vibration with the product) and easy to find the protected object; if the scope of emission signals at the receiver, the receiver lights straight on, not to issue a warning tone. To promote the control wheel can be set up and down the distance to use:
1, anti-lost function: the receiver to receive control wheel dial to the maximum distance, the power switch to: "Anti-lost N-ON", issued a "tick" sound the boot prompt sound, then the receiver issue: "Di ... Di ..." wait to learn the tone, then the net transmitter power switch to ON, the transmitter signal light flashing, start sending signals, the receiver receives the signal issued after puberty machine: " Didi "Two tone of success in learning, and the lights flash, learning the code successfully. Note: If the receiver power (in this case the transmitter is turned off), made "Didi" Two tone of success in learning, please check whether there are other transmitters in the work. If after turning on the transmitter, receiver, or issue: "tick ... tick ..." wait to learn the tone that has not yet learned the transmitter signal. Please check the control wheel position is appropriated the right direction, whether the transmitter is working properly.
2, after the success of learning the code, you can drive from the control wheel, set the corresponding object is a proper distance protection, we recommend bags, wallets and other items normally located in a distance of about 3 meters, a child or pet animals is relatively far away, please customized according to the situation.
3, when the protected object to leave the set distance, the receiver alarm (sound alarm sound products, tips, there is vibration and vibration alarm indication tone tips).
4, to find function: to pay the receiver power switch to "look for S-ON" at this time the receiver issued a "Didi" of waiting to learn the tone, when receiving the transmission signal, the receiver issued a "dee dee dee dee " sound was a tone and vibration (vibration with the product), easy to find the protected object, such as to leave the reception range, receiver lights straight on, not to issue a warning tone.
5, the transmitter features a protective object in the body, the receiver who wear myself or my master.
Similar Product Recommend