Features● DWDM system dispersion compensation and broadband low residual dispersion● G.652 fiber C-band 99% slope compensation (standard value)● Low insertion loss● Low polarization mode dispersion● Performance indicators by Telcordia GR-2854-CORE standard certification● Reliability by Telcordia GR-1221-CORE standard certification
Description
HTF DCM Dispersion Compensation Device function with slope dispersion compensation for standard single-mode fiber can DCM (G.652) were dispersion and dispersion slope compensation broad band in the C-band, allowing the system to optimize residual dispersion. In the dispersion compensation value of 1545nm wavelength dispersion can reach -2070ps /nm.
The DCMs offer a high dispersion compensation level and a very low insertion loss penalty. They provide negative dispersion compensation over the full C-Band with possible distance extensions of up to 80 kilometers.
Applications
Telecom
Data center
5G Network
Long Haul Network
Fiber optical network
| Parameter | Min. | Max. |
| Brillouin Scattering Threshold (dBm) | 6 | - |
| Non-linear Coefficient (n2/Aeff) (W-1) | - | 1.4*10-9 |
| Effective Area (Aeff)@1550nm (um2) | 20 | - |
| Maximum Input Power (dBm) | | 23 |
| Operating Temperature Range | -5℃ | 70℃ |
| Storage Temperature Range | -40℃ | 85℃ |
| Relative Humidity | <85% | |
| Environmental / Reliability Testing | Comply with Telcordia GR-2854 and GR-1221 standard |
| Size (mm) | 482.6(W) x 350(D) x 43.6(H) |
Ordering Information
| Parameter | DCM-20 | DCM-40 | DCM-60 | DCM-80 | DCM-100 | DCM-120 |
| Compensated Distance (km) | 20 | 40 | 60 | 80 | 100 | 120 |
| 1545nm Dispersion (ps/nm) | -340+/-10 | -670+/-20 | -1000+/-30 | -1340+/-40 | -1680+/-50 | -2010+/-60 |
| 1545nm Relative Dispersion Slope (nm-1) | 0.0036 +/- 10% |
| Insertion Loss (dB) | <=3.3 | <=4.7 | <=6.4 | <=8.0 | <=9.5 | <=11.0 |
| Insertion Loss (typ) (dB) | 2.7 | 4.0 | 5.4 | 6.7 | 8.0 | 9.3 |
| Polarization Mode Dispersion (ps) | <=0.6 | <=0.7 | <=0.8 | <=0.9 | <=1.0 | <=1.1 |
| Polarization Mode Dispersion (typ) (ps) | 0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 |
| Polarization Dependent Loss (dB) | <=0.1 | <=0.1 | <=0.1 | <=0.1 | <=0.1 | <=0.1 |
HT6000 Includes the Following Cards
| NMS management card | 100G QSFP28 to CFP transponder | 2xQSFP28 to CFP2 200G Muxponder |
| 100G Muxponder:QSFP28 ↔4xSFP28 | 40G&100G OEO:6*QSFP28 | SFP28 25G Quad transponder |
| SFP+ Multi-Rate Quad transponder | Redundant Multi-Rate Dual transponder | EDFA Optical Amplifiers |
| Bidi EDFA Optical Amplifiers | 16ch DWDM MUX/DEMUX | 40ch DWDM MUX/DEMUX(AAWG) |
| OLP Optical Line Protector | DWDM Passive Optical Add/Drop Multiplexers | / |
HTF DWDM Transmission Solution
DWDM peer-to-peer case
DWDM chain network case
DWDM+OLP optical line protection Case
DWDM Ring network case
DWDM single fiber bidirectional networking case
DWDM ultra long distance solution