Welcome Customer !

Membership

Shanghai kangQuan Valve Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 阀门

Xwboo>Products
Product Categories

Shanghai kangQuan Valve Co., Ltd.Free·1YRS

  • E-mail

    gu@kqvalve.com

  • Phone

    0086-021-57626759

  • Address

    59 Jiugan road Sijing industrial zone Songjiang District Shanghai China

Contact Now

Rising Stem Resilient Seat Gate Valve

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
Rising Stem Resilient Seat Gate Valve
Product Details

BRIEF INTRODUCTION
Resilient-seated gate valve is our company cooperated with Shanghai University to research the high-quality green product, importing the advanced technology in Germany. And obtained the P&R&D item in No.3 in Shanghai, the new technology, new material, and new technics are applied that flat bottom type ,and static spray innocuity EP inside and outside surface of valve ,gate disc is covered with rubber etc. it is improve the seal capability, anti-corrosion, life-span and so on. This valve widely applied in the liquid pipes for open or close fixed in such table-water , sewage disposal, foodstuff and medicine ,air-condition system, fire protection system, building etc.
FEATURES
Treating with rubber
Both inner and outer are coated with advanced knowledge of rubber vulcanization to ensure the elasticity of rubber and make sure the exact geometry dimension. Rubber and ductile cast iron valve are together hardly. Which can avoid fall-off for long-term use .
Anti- corrosion
Both inner and outer are coated with non-toxic powder epoxy resin to strengthen the capacity of Corrosion resisting and raise the quality of water supply .
Ruggedization
The older ductile iron valve is easy to rupture after being impacted by nonego. It can stoprupture depend on the good mechanics capability of ductile iron .
Three "O" sealed ring
With the three "O"- rings, the leakage can be greatly reduced and the "O"- ring can bere placed under this condition with pressure and without stopping water. The thrust axle tree reduces the frictional resistance and lowers the operational torque. And it can be switch sealing without opening and closing.
Rigid round body
The body is founded minutely, the rigid geometry size ensure inner sealing of valve without any process.
Light weight
This body is made of ductile iron, it is 20%-30% lighter than the olds. Easy to fix and service.

TECHNIC CRITERIONNominal pressure:1.01.6MPaApplicable medium: water sewage oil etc.Applicable temperature:≤120oCMain material of valve: ductile iron ,iron.

APPLICABLE STANDARDSAmerican Standard Design to ANSI/AWWA C509Face to face dimension to ASME B16.10-2000(ISO 3 series)Flange and drilling To SME/ANSI B16.42-1998British StandardDesign to BS5163BS5150Face to face dimension to BS5163(ISO 3seriesISO19 series)Flange and drilling To BS4504 part1(EN1092)Germany StandardDesign to DIN3352Face to face dimension to DIN3202(F4:ISO 14 series;F5: ISO 15 series)Flange and drilling to BS EN1092Chinese StandardDesign to CJ/T219-2005Face to face dimension to GB12221(3) (ISO14 series) GB12221(15)(ISO 15series)Flange and drilling to GB/T17241-1998


NO

Part name

Material

1

Body

Ductile cast iron

2

Wedge

Ductile cast iron + EPDM

3

Stem nut

ZCuAl10Fe3 Gunmetal

4

Gasket

EPDM

5

Bonnet

Ductile cast iron

6

Packing

EPDM,NBR

7

Gland

Ductile cast iron

8

Stem

2Cr13S.S.x 20Cr13

9

Yoke

Ductile cast iron

10

Hand wheel nut

ZCuAl10Fe3 Gunmetal

11

Hand wheel

Ductile cast iron